Hifiverse

Plattenspieler - Thuono TH400

Beschreibung, Bilder, technische Daten und Spezifikationen

Thuono TH400
Bildquelle - (c) Thuono

The TH400 is the top turntable of the TH series from Thuono Audio, an Italian company in Thiene, near Vicenza, that designs and builds belt-drive turntables by hand. Thuono calls it the most performative model of the series. It has a 400 mm platter with a proportionally designed rotation system. The price is EUR 48,000 including VAT, tonearm included.

Key specs that matter

Speeds are 33.33 and 45 rpm. Drive is by a high-torque 12 V DC motor and a belt, with a damped 160 mm flywheel, the largest in the TH series. Both elements of the chassis combine a thick layer of aluminium with Nero Marquinia marble, and decoupling is by magnetic suspensions. Dimensions are 775 x 360 x 510 mm (W x H x D), and weight is 60 kg.

Engineering and use context

Thuono sized the platter, frame and motor system for a very high inertial torque, to minimise slowdowns and rotational disturbance. Its aluminium platter is combined with a disc of damping, antistatic plastic. A polished pin with very low surface roughness fixes the platter in position and prevents wear of the self-lubricating bushings inside the platter support. The spindle rotates on a hardened steel sphere, with its contact point designed to reduce resonances, and the whole bearing assembly is sized for the platter diameter.

On the drive side, the DC motor is housed in a flexible damping rubber support. Motor and flywheel are mounted on a solid Nero Marquinia marble cylinder. A rotation-speed encoder monitors and corrects speed variations, and a microprocessor combined with a Hall effect sensor regulates the motor.

Each of the three magnetic suspensions consists of two oppositely placed magnetic rings. The upper ring is connected to a suspension shaft guided by a self-lubricating, low-friction bushing that requires no maintenance over its lifetime. These suspensions isolate the upper chassis and minimise contact between the upper and lower chassis. Oversized decoupling support discs are placed under the base. Resonance treatment is applied to the platter rotation system, the flywheel and the tonearm support lever.

Pairing

The included Thuono tonearm has a carbon fibre and titanium tube, ceramic ball bearings, pure silver wiring and a DIN plug output. A Thuono screw-on clamp in bronze and aluminium comes with the turntable. A phono stage and a phono cable with a DIN plug are required.

Alternatives

The Thuono TH350 uses a 350 mm platter and a 140 mm flywheel in a 45 kg marble and aluminium chassis.

Spezifikationen

  • Modellbezeichnung

    TH400

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Aluminium

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    775 x 510 x 360

  • Gewicht (kg)

    60

  • Offizieller Link

Weitere Komponenten