Hifiverse

Plattenspieler - Thuono TH350

Beschreibung, Bilder, technische Daten und Spezifikationen

Thuono TH350
Bildquelle - (c) Thuono

The TH350 is the intermediate turntable in the TH series from Thuono Audio, a maker in Thiene, Italy, that builds its turntables by hand. It sits between the TH300 and the TH400, and each of the three takes its number from its platter diameter. Thuono presented the series in 2023 after more than five years of study and prototypes. The price is EUR 34,000 including VAT, with a Thuono tonearm included.

Key specs that matter

Speeds are 33.33 and 45 rpm. The platter is 350 mm in diameter and is belt-driven through a 140 mm flywheel. Its chassis combines aluminium and Nero Marquinia marble, and decoupling is by magnetic suspensions. Dimensions are 685 x 334 x 467 mm (W x H x D), and weight is 45 kg.

Engineering and use context

According to Thuono, a 350 mm platter is an unusual size for a turntable and gives a higher inertial torque against slowdowns and rotation disturbances. The aluminium platter is coupled with a damping, antistatic plastic layer above it. It is fixed by a polished pin running in lubricated bushings to minimise friction noise and bushing wear, and the pin rests on a hardened steel sphere whose foothold was designed to minimise resonances. This rotation system sits on a reinforced double chassis of marble and aluminium.

Completely separated from the chassis, the drive unit has a DC motor housed in a flexible damping rubber support. Motor and flywheel are mounted on a solid Nero Marquinia marble cylinder. The flywheel increases rotational inertia and absorbs motor vibration. A rotation-speed encoder monitors and corrects speed variations, while a microprocessor combined with a Hall effect sensor regulates the motor.

Three magnetic suspensions, each of two oppositely placed magnetic rings, isolate the upper chassis. Every upper ring is connected to a suspension shaft guided by a self-lubricating, low-friction bushing that requires no maintenance, and oversized decoupling support discs are placed under the chassis. Key structural points were treated to absorb resonances - the platter rotation system, the flywheel and the tonearm support lever.

Pairing

The supplied Thuono tonearm has ceramic ball bearings, pure silver internal wiring and a DIN plug, and is made with pivot-to-stylus distances of 239, 254 and 309 mm. A screw-on Thuono clamp of bronze and aluminium is included as well. A phono stage and a phono cable with a DIN plug are required.

Alternatives

The Thuono TH400 is the top model of the series, with a 400 mm platter and a 160 mm damped flywheel.

Spezifikationen

  • Modellbezeichnung

    TH350

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    Aluminium

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    685 x 334 x 467

  • Gewicht (kg)

    45

  • Offizieller Link

Weitere Komponenten