The T1 EVO BT is a belt-drive turntable from Pro-Ject Audio Systems, the version of the T1 EVO with a Bluetooth 5.0 aptX HD transmitter and an integrated MM phono preamplifier. Pro-Ject calls it an audiophile entry-level turntable, hand-made in Europe. It is one of three T1 EVO models, next to the Standard and the Phono, and the European list price was EUR 499. Finishes are High-Gloss Black, Satin White and Walnut.
Key specs that matter
Speeds are 33 and 45 rpm with electronic speed change. Speed variance is 0.7% at 33 rpm and 0.6% at 45 rpm, wow and flutter is 0.25% and 0.23%, and signal-to-noise ratio is 65 dB. The platter is 8 mm blasted glass with a felt mat, on a stainless steel/brass main bearing. Its aluminium tonearm has an effective length of 218.5 mm, an overhang of 22.0 mm and an effective mass of 8.0 g. A pre-mounted counterweight covers cartridges of 5 - 10 g, and tracking force range is 0 - 50 mN, pre-adjusted to 17.5 mN. Outputs are RCA. Gain of the MM phono preamplifier is 34 dB, with 47 kohms/100 pF input impedance. Power consumption is 4.5 W max. Dimensions are 415 x 100 x 335 mm (W x H x D), and weight is 3.8 kg net.
Engineering and use context
According to Pro-Ject, the CNC-machined plinth has no plastic parts and no hollow spaces inside, to avoid unwanted vibrations within the chassis. Purpose-chosen feet isolate the deck from ambient vibrations.
Drive is by belt from the motor to a larger sub-platter, which is mounted in a 0.001 mm tolerance main bearing with a hardened steel axle and a brass bushing. A three-position switch combines on/off and the speed change.
The tonearm is a one-piece aluminium design with an integrated headshell and low-friction bearings. Pro-Ject pre-adjusts the Ortofon OM 10, a moving-magnet cartridge with an elliptical diamond stylus and 4 mV output.
Two outputs are available on the RCA sockets - Line OUT through the integrated preamplifier and Phono OUT for an external phono stage. The Bluetooth module is a Class II transmitter of 2.5 mW in the 2.4 - 2.48 GHz band. It transmits as soon as the turntable is connected to mains and pairs automatically with Pro-Ject receivers such as the MaiA, MaiA DS, BT Box S and BT Box E. A switch turns the module off and on for a new receiver. A dust cover with adjustable hinges, the felt mat, a 15 V DC/800 mA power supply and a low-capacitance Connect it Phono E RCA cable are included.
Pairing
On Line OUT, any line input such as CD or Tuner is suitable. On Phono OUT, an MM phono input is required.
Alternatives
The T1 EVO Phono is the same Pro-Ject turntable with a switchable phono preamplifier and without Bluetooth.