The Revolv is a belt-drive turntable from J. A. Michell Engineering, designed, engineered and assembled by hand in the UK. In the Michell range it sits between the minimalist TecnoDec and the Gyro. The price is USD 5,999 without a tonearm, or USD 7,198 with Michell's T8 tonearm, a record clamp and a dust cover.
Key specs that matter
It is an unsuspended design for direct mechanical grounding. Its chassis is a solid 19 mm aerospace-grade aluminium tooling plate, machined from a single block. The platter is Delrin, with 10 mm solid-turned peripheral brass weights for increased inertia. Speeds are 33.3 and 45 rpm, selected by electronic switching. The main bearing is an inverted mono-helix design with oil circulation. Each Sorbothane isolation foot has six damping nodes. A precision-machined aluminium arm plate couples the tonearm rigidly to the chassis.
Engineering and use context
Michell places the motor in a heavy, freestanding housing that is completely independent of the turntable, and its only connection is the drive belt. According to Michell, this separation reduces the transfer of motor vibration to the playback components. Both the motor unit and its matching power supply are machined from solid billets of aerospace-grade aluminium, as rigid enclosures with minimal gaps to block RF interference. The highly regulated PSU housing is machined as a clamshell from a single billet.
Motor pod and PSU are grounded and electromagnetically shielded, and the whole system is linked by a shielded interconnect. In the bearing, a mono-helix groove circulates oil to the thrust point and the bearing walls. Michell describes the Revolv as upgrade-ready.
Pairing
A tonearm and cartridge are required with the base version, and the matching tonearm is the Michell T8. A phono stage, either separate or built into the amplifier, is required.
Alternatives
The Michell Gyro is the brand's fully suspended turntable.