Hifiverse

Plattenspieler - Michell Engineering Gyro

Beschreibung, Bilder, technische Daten und Spezifikationen

Michell Engineering Gyro
Bildquelle - (c) Michell Engineering

The Gyro is the suspended belt-drive reference turntable from Michell Engineering of the UK. Its line goes back to the GyroDec, which first appeared in 1982, and the model has gone through many small revisions since then. The version announced in Stevenage on 16 October 2025 keeps the familiar outline, while Michell describes it as a ground-up engineering overhaul of everything beneath the surface. It replaces both the Gyro SE and the GyroDec. UK pricing is GBP 5,995 without arm or cartridge, GBP 6,795 with the T8 arm and GBP 7,295 with the TecnoArm 2.

Key specs that matter

Speeds are 33.3 and 45 rpm with electronic speed control. The main chassis is precision-machined 19 mm aerospace-grade aluminium tooling plate, where previous versions used cast aluminium. A three-point suspension with the Equilibria self-centring mechanism has a resonant frequency of 3.5 Hz, down from 4.5 Hz. Its Delrin platter turns on an inverted bearing with double-helix oil pumping for twice the lubrication flow. Below the deck is a high-mass aluminium baseplate, and the turntable stands on Sorbothane feet with six contact nodes per foot.

Engineering and use context

Michell's engineers used finite element analysis and AI-assisted modelling to optimise vibration control, mass distribution and damping. Brass weights embedded in the chassis balance the tonearm assembly and change its resonance behaviour. Around the tonearm mount, foam damping inserts suppress reflections, and a precision tonearm coupling replaces the earlier Delrin spacers. Equilibria also provides lateral damping of the suspension.

On the old Gyro the base was the acrylic Spider frame, now replaced by the aluminium platform. The platter edge is smooth, as the belt groove has been removed and the belt is self-levelling. Each Sorbothane foot is a custom design.

Drive comes from a heavy, freestanding motor housing that is completely independent of the turntable, and its only connection is the drive belt. Both the motor unit and its matching power supply are machined from solid billets of aerospace-grade aluminium, with minimal gaps to block RF interference. The motor is a new shielded design with integrated grounding, and the system is linked by a shielded interconnect. A Unicover dust cover and a record clamp are supplied, and the deck is offered in black or silver.

Pairing

A tonearm and cartridge are required with the base version. Factory packages with the Michell T8 or TecnoArm 2 are offered. A phono stage matched to the chosen cartridge is required.

Alternatives

The Michell Revolv is a rigid turntable on a 19 mm aluminium chassis machined from a single billet, positioned between the TecnoDec and the Gyro at GBP 3,995 without arm or cartridge.

Spezifikationen

  • Modellbezeichnung

    Gyro

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Floating

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link