The Planar 78 is a single-speed belt-drive turntable from Rega Research, designed solely for the reproduction of 78 rpm records. Rega launched it on 19 April 2019 at GBP 299. Since January 2023 it has a matt black plinth finish that matches the rest of the Rega range. Rega omitted unnecessary functions and concentrated the manufacturing cost on the quality of the parts. It is covered by Rega's lifetime limited warranty against manufacturing defects.
Key specs that matter
Speed is 78 rpm only. Drive is by a 24 V low-noise synchronous motor and an Advanced EBLT drive belt, supplied as standard. The platter is phenolic resin with a flywheel effect and runs on a precision main bearing. It is equipped with the hand-assembled RB220 precision tonearm. Rega's own RB78 moving magnet cartridge for 78 rpm records is optional and sold separately. Power comes from the Rega PS2 mains adaptor with a 24 V AC, 100 mA output. Dimensions are 447 x 117 x 360 mm (W x H x D, lid closed), and weight is 4.2 kg.
Engineering and use context
The RB220 is an evolution of the RB250, which was supplied as standard on early Planar 2 and P2 turntables. It uses Rega's patented ultra-lightweight polymer bearing with selected vertical and horizontal bearings, a die-cast arm tube and a three-point plinth mounting technique. Rega states that this mounting reduces stress on the plinth. Tracking force is set with the screw-on balance weight, where half a turn (180 degrees) equals 1 g, and bias adjustment on the RB220 is automatic. The arm earth is connected through the screening of the tonearm cable.
Under the lightweight plinth sits the on/off switch. The main bearing is factory-assembled with a film of thick lubricant, and full 78 rpm speed is reached between 10 and 15 seconds after switch-on. A clear dust cover, the balance weight and an alignment protractor are included.
The RB78 is a mono cartridge that tracks at 1.75 g and is wired internally in series. With an amplifier that has a mono switch, either the red and green or the white and blue arm wires are used. Without a mono switch, the arm wires are joined in pairs, red with white and blue with green. Upgrades offered for the Planar 78 include a drive belt upgrade and the Rega wall bracket.
Pairing
A phono stage with an MM input is required, either built into the amplifier or external. The tonearm phono leads connect red to the right channel and black to the left. RB78 is the matching cartridge, and Rega lists the Fono MM and Fono Mini A2D as matching phono stages.
Alternatives
The Rega Planar 1 is the entry turntable of the standard range, playing 33 and 45 rpm records with an RB110 tonearm and a phenolic resin platter.