The Planar 8 is a belt-drive turntable from Rega, made in the UK and supplied with the RB880 tonearm and the Neo PSU. Rega took its inspiration from the Naiad turntable, with the goal of bringing the essence of that design to an affordable price. Compared with the earlier RP8, the outer frame has gone, and a removable single-piece dustcover is used instead.
Key specs that matter
Speeds are 33 1/3 and 45 rpm. The platter is a three-piece laminated glass platter made from two Pilkington glasses. Drive is by a 24 V synchronous low-vibration motor and a Reference EBLT drive belt. With the dustcover, the turntable measures 420 x 125 x 315 mm (W x H x D) and weighs 4.2 kg. Its Neo PSU measures 180 x 50 x 155 mm and weighs 0.6 kg. Finishes are matt white, supplied with a clear dustcover, and matt Polaris Grey.
Engineering and use context
Inside the plinth is a Tancast 8 foam core, sandwiched between two HPL (high-pressure laminate) layers. Rega quotes it as 30% lighter than the original RP8 plinth and more rigid. Between the tonearm mounting and the main hub bearing sits a phenolic resin double brace in a stressed beam assembly. Most of the platter mass is kept on the outer rim for flywheel effect. Below it, a single-piece machined aluminium sub-platter runs on a hardened tool steel spindle in a custom brass housing.
The motor is mounted from the bottom, a method taken from the Naiad, and each motor is hand-tuned to its own Neo power supply. Based on the DSP generation of the RP10 supply, the Neo PSU offers fine electronic speed adjustment with output distortion below 0.15%. It also drives the anti-vibration circuit beneath the turntable.
On the RB880 tonearm, a preloaded zero-tolerance bearing assembly is adjusted to less than 1/1000th of a mm. A thinner stainless steel balance weight gives greater adjustability, and the arm is wired with a low-capacitance phono cable terminated in locking phono plugs. Factory-mounted cartridge options are the Nd7 and Nd9 (MM) and the Ania Pro and Apheta 3 (MC), and the Nd9 was added in a November 2025 update.
Pairing
The Nd7 and Nd9 versions require an MM phono input. Ania Pro and Apheta 3 versions require an MC phono stage or the MC input of an amplifier. Its thinner balance weight broadens the range of cartridges the RB880 can balance.
Alternatives
The Planar 10 sits above the Planar 8 in Rega's turntable range.