The Greenwich is a direct-drive turntable from Wilson Benesch of Sheffield and the entry point into the company's GMT Collection. It shares the ALPHA-OMEGA drive platform with the Prime Meridian and the GMT One, while the structure and isolation systems change through the range. The GMT One had its premiere at High End Munich 2024. Greenwich production started in April 2026, with a lead time of 12 to 14 weeks.
Key specs that matter
Speeds are 33.3, 45 and 78 rpm with fine speed trim. The OMEGA Direct Drive is a 3-phase synchronous motor of 381 mm diameter with 21 coreless, slotless coils and 14 NdFeB magnets. Wilson Benesch quotes a time-average torque of 0.718 N.m at 1.2 A RMS and 33.3 rpm, an RMS torque ripple of 0.001342 N.m, and wow and flutter as not measurable. The turntable weighs 64 kg, and the separate ALPHA Drive weighs 30 kg.
Engineering and use context
OMEGA was developed for the GMT platform in a research programme with Sheffield Hallam University, supported by Innovate UK funding. Its slotless construction and circumjacent radial force architecture eliminate cogging and reduce torque ripple. A magnetic counterforce system reduces the effective dynamic mass acting on the Angstrom bearing and keeps Hertzian contact forces within safe limits.
The ALPHA Drive generates quartz-referenced multi-phase sine wave signals through three class A amplifiers and delivers a controlled current to each motor pole, without complex feedback correction. All functions run from the GMT Control App on a dedicated tablet. A router supplied with the unit links the tablet over Wi-Fi and does not connect to the internet.
On the Greenwich, isolation is a tuned spring damping system. Its STAGE One signal architecture is integrated within the armhub, with the connection type fixed at order. The deck is configured for one GRAVITON Ti armwand, which sits on a kinematic bearing with 3-point location and is wired internally with silver/Teflon wire. Its effective length is 304.8 mm, effective mass is 14 g, offset angle is 18° and overhang is 13.2 mm.
Options are the R1 Carbon Rack and the VTA Control System, which is standard on the higher models. It lifts and lowers the tonearm, sets vertical tracking angle through a piezo-controlled mechanism with nanometre resolution and stores VTA positions. Accents on the four caps of the glass top and on the platter weights come in polished silver or polished gold.
Pairing
A phono stage is required. The matching cartridge is the TESSELLATE Ti, offered in boron, sapphire and diamond versions.
Alternatives
The Prime Meridian is the next Wilson Benesch turntable in the GMT Collection, with FrACTaL damping and the VTA Control System as standard.