Hifiverse

Plattenspieler - Wilson Benesch GMT One

Beschreibung, Bilder, technische Daten und Spezifikationen

Wilson Benesch GMT One
Bildquelle - (c) Wilson Benesch

The GMT One System is a complete turntable installation from Wilson Benesch of Sheffield, announced in May 2019 for the company's 30th anniversary, with a prototype shown at Munich HIGH END 2019. It was developed under the project name The Mondrian Project, which ran for more than 20 years with UK and European grant funding. Motor, drive electronics, tonearm, cartridge, step-up stage, isolation system and rack are all part of the system, and its total weight is 369.5 kg.

Key specs that matter

Wilson Benesch's OMEGA Drive is a synchronous, 3-phase, zero-cogging direct drive motor, 381 mm in diameter, with 21 coreless-slotless poles and a patent applied for. On its own it weighs 14 kg. Time-average torque is 0.718 N.m at 1.2 A RMS and 33.3 rpm, and the RMS value of the torque ripple is 0.001342 N.m. Speeds are 33.3, 45 and 78 rpm, adjustable in 0.01 increments, and wow and flutter is quoted as not measurable. The GRAVITON Ti arm has an effective length of 304.8 mm, a mounting distance of 291.6 mm, an 18 degree offset angle, 13.2 mm overhang and an effective mass of 14 g.

Engineering and use context

According to Wilson Benesch, the motor uses a circumjacent radial force design. Its ALPHA Drive electronics generate three pure sine waves through three linear class-A amplifiers, governed by an onboard 11.2896 MHz quartz crystal.

GRAVITON Ti is a single-piece moulded, tapered carbon fibre tube of quadruple helix construction in a graphene epoxy matrix, with uni-directional carbon fibre and a Rohacell sandwich section. Under a maximum stress of 8.5 MPa the armtube deflects 0.003 mm. A kinematic bearing gives 3-point location, internal wiring is silver and Teflon, and a linear piezo actuator adjusts VTA with an accuracy of 1 nanometre.

Each TESSELLATE Ti cartridge has a titanium body and a hybrid cantilever with boron, sapphire or diamond options. The LeVeL isolation system uses four microprocessor-controlled pneumatic rams with a resonant frequency of 1.7 Hz, is fully autonomous and comes with an oil-free medical-grade air compressor. In the R1 rack both the ALPHA Drive and OMEGA Drive systems have their own place.

Pairing

The STAGE One step-up stage is positioned directly above the tonearm. A phono stage with an MM input is required for its output. Speed, VTA and other functions are controlled from the WB GMT Control app on a smart device, over a preconfigured router that does not connect to the internet.

Alternatives

The Wilson Benesch Prime Meridian System is the other turntable system in the company's range.

Spezifikationen

  • Modellbezeichnung

    GMT One

  • Geschwindigkeit

    33/45/78

  • Antrieb

    Magne-drive

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    369.5

  • Offizieller Link

Weitere Komponenten