The Forte is a belt-drive turntable from European Audio Team (E.A.T.) of Lucenec, Slovak Republic. Its design combines two principles, a separate sub-chassis and a mass-loaded turntable, and the motor unit is a separate decoupled chassis placed to the left of the main plinth. E.A.T. supplies it as the Forte with the C-Note 12-inch tonearm.
Key specs that matter
Speeds are 33.33 and 45.11 rpm with microprocessor-controlled electronic speed change. Speed variance is ±0.09% and wow and flutter is ±0.008%. Signal-to-noise ratio is -73 dB (electrical noise). The platter is 400 mm in diameter and weighs more than 20 kg. For the C-Note 12-inch tonearm E.A.T. specifies an effective length of 304.8 mm, an effective mass of 19.2 g, an overhang of 13.2 mm and a downforce range of 0 - 3.0 g. Power comes from a universal switch-mode supply (18 V DC/1.33 A), and consumption is 8.5 W maximum, 0.5 W in standby. Dimensions are 710 x 250 x 440 mm (W x H x D), and the turntable weighs 65 kg.
Engineering and use context
The chassis is MDF filled with metal sand, and four height-adjustable, magnetic supported and TPE-damped feet act as the sub-chassis. E.A.T. quotes close to 100% isolation from the floor and from airborne resonances for this foot system.
Its platter has two parts, one in a soft alloy and one in a harder alloy, to reduce energy flow. The soft part holds neodymium magnets for magnetic suspension, and sorbothane damping is built in. At 33 rpm the platter stores 2460 J of kinetic energy. A mat made from recycled vinyl records is bonded to the top, and a clamp holds the record.
The bearing is inverted, with an oversized polished shaft and a ceramic ball on top running against a Teflon plate as bearing mirror. Because the magnets carry most of the platter mass, the bearing sees very low pressure, and that pressure is adjustable.
Two silent-running motors in a dual motor design drive the platter via two silicone string belts, front and rear. An electronic circuit generates clean AC for them, and the heavy motor chassis is a metal and MDF sandwich. The tonearm base is heavy metal isolated with sorbothane. On the C-Note, cardan and unipivot bearings are immersed in damping fluid, and the arm has a 5-pin output connector.
Pairing
The counterweight balances cartridges of 5 - 9 g, or 8.5 - 13 g with the additional insert. A phono stage matching the chosen cartridge is required.
Alternatives
The Forte S is the single-chassis version, with a 360 mm platter and both motors built into the plinth.