Hifiverse

Plattenspieler - European Audio Team (EAT) FORTE S

Beschreibung, Bilder, technische Daten und Spezifikationen

European Audio Team (EAT) FORTE S
Bildquelle - (c) European Audio Team (EAT)

The Forte S is the single-chassis version of the Forte belt-drive turntable from European Audio Team (E.A.T.) of the Slovak Republic. According to E.A.T., the S stands for small, although the deck is still 55 cm wide against the 70 cm of the two-chassis Forte. It is supplied with the C-Note 12-inch tonearm and comes in high gloss piano black or high gloss Makassar.

Key specs that matter

Speeds are 33.33 and 45.11 rpm with microprocessor-controlled electronic speed change and lighted control buttons. Speed variance is ±0.09% and wow and flutter is ±0.009%. Signal-to-noise ratio is -73 dB (electrical noise). Its platter measures 360 mm and weighs 15 kg. For the C-Note 12-inch, effective length is 304.8 mm, effective mass is 19.2 g, overhang is 13.2 mm and the downforce range is 0 - 3.0 g. A universal switch-mode supply (15 V DC/1.6 A) powers the deck, and consumption is 8.5 W maximum and 0.5 W in standby. Dimensions are 550 x 250 x 440 mm (W x H x D), and weight is 44 kg.

Engineering and use context

E.A.T. reduced the platter from the 40 cm and 20 kg of the Forte to keep as much moving mass as possible at the outer radius. Sorbothane damping is applied on the inner side of the platter, and a black damping mat made from recycled vinyl is bonded to the top. A record clamp is included.

Its bearing is an inverted construction with a ceramic ball on top facing a Teflon plate. Two neodymium magnets hold the platter and carry most of its load, and the pressure on the ceramic ball is reduced.

Both AC motors sit symmetrically on the right side beside the platter, inside the single chassis. Unlike the Forte, it needs no belts of different lengths. The control panel has three keys - 33, 45 and STBY-STOP for standby.

The deck is mass-loaded and stands on four magnetic feet with adjustable height, which act as the sub-chassis. On the C-Note tonearm, cardan and unipivot bearings are immersed in damping fluid, and the output is a 5-pin connector.

Pairing

The counterweight covers cartridges of 5 - 9 g, and 8.5 - 13 g with its additional insert. A phono stage matching the chosen cartridge is required.

Alternatives

The Forte is the two-chassis model, with a 400 mm platter and a separate decoupled motor unit.

Spezifikationen

  • Modellbezeichnung

    FORTE S

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    k. A.

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    k. A.

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0.009

  • Signal-Rausch-Abstand (dB)

    -73

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    550 x 250 x 440

  • Gewicht (kg)

    44

  • Offizieller Link