The F400 is the audiophile fully automatic sub-chassis turntable from Rekkord Audio, made in Germany. Rekkord was created by Heinz Lichtenegger, founder of Pro-Ject Audio Systems, within the Audio Tuning group. It sits above the F300 in the Rekkord automatic range and comes with a pre-adjusted Ortofon 2M Red cartridge. MSRP is EUR 699 in satin black, EUR 799 in cherry real wood veneer and EUR 849 in makassar real wood veneer or high gloss black.
Key specs that matter
Speeds are 33, 45 and 78 rpm from an electronically regulated DC motor, with belt drive through a polished flat belt. Wow and flutter is 0.06% DIN and 0.035% WRMS, rumble is 48 dB and signal-to-noise ratio is 72 dB, with a frequency response of 20 Hz - 22 kHz. Its Ortofon 2M Red MM cartridge has an elliptical stylus, a weight of 7.2 g, a recommended tracking force of 1.8 g, channel separation of 22 dB and a load of 47 kOhms / 150-300 pF. Output is Phono RCA plus a ground cable, and power comes from an external 15 V DC, 800 mA supply. Dimensions are 430 x 130 x 365 mm (W x H x D) and weight is 6.3 kg.
Engineering and use context
Rekkord builds the entire automatic system, the tonearm and the damped aluminium platter on a floating sub-chassis platform decoupled from the rest of the chassis. Electronic speed monitoring and control holds the speeds accurate and stable. A solid wooden console of MDF, made from a single piece, absorbs vibration and impact sound. Inside the solid aluminium platter a damping ring damps resonances and minimises wow and flutter, and an antistatic felt surface covers it.
Its 8.3-inch Ultra-Low-Mass (ULM) aluminium tonearm has a cardan bearing with steel tip-ball bearings from Rekkord's own production. Its E(asy)motion Wire inner tonearm wiring and the low-friction bearing let the arm move with almost no resistance. Massless tracking force adjustment places the centre of gravity directly at the bearing centre. A stiff carbon fibre headshell carries the 2M Red, and a viscosity-damped tonearm lift is included.
Start and stop are automatic, as is the tonearm movement. Experienced technicians adjust and fine-tune the automatic mechanism, which is completely disengaged while the record is playing. Cable, dust cover and a singles adapter are supplied with the turntable.
Pairing
A phono stage with an MM input is required, either a separate phono preamplifier or the phono input of an amplifier. The ground cable connects to the ground terminal of that phono stage.
Alternatives
The F300 is the next Rekkord automatic sub-chassis turntable down, with 33 and 45 rpm and an Audio-Technica AT91 cartridge.