Hifiverse

Plattenspieler - Rekkord Audio F300

Beschreibung, Bilder, technische Daten und Spezifikationen

Rekkord Audio F300
Bildquelle - (c) Rekkord Audio

The F300 is the advanced fully automatic sub-chassis turntable from Rekkord Audio, handmade in St. Georgen in the Black Forest, Germany. Its tonearm has adjustable tracking force and anti-skating. Its automatic mechanism is adjusted and fine-tuned by experienced technicians. Rekkord lists an MSRP of EUR 599, in black, silver or Stirling Oak.

Key specs that matter

An electronically regulated DC motor drives the platter at 33 and 45 rpm through a polished flat belt. Wow and flutter is 0.06% DIN and 0.035% WRMS, rumble is 48 dB and signal-to-noise ratio is 72 dB, with a frequency response of 20 Hz - 22 kHz. The Audio-Technica AT91 MM cartridge has a conical stylus, a recommended tracking force of 2 g and a load of 47 kOhms / 100 pF. Output is Phono RCA plus a ground cable. An external 15 V DC, 800 mA power supply is used. Dimensions are 430 x 130 x 365 mm (W x H x D) and weight is 6 kg.

Engineering and use context

On the F300 the entire automatic system, the tonearm and the damped aluminium platter are built on a floating sub-chassis platform, decoupled from the rest of the chassis. That main chassis is a single piece of MDF, chosen by Rekkord for its resonance-damping character. Stamped from aluminium and balanced, the platter carries an antistatic felt surface.

Rekkord's 8.3-inch weight-balanced aluminium tonearm is an Ultra-Low-Mass (ULM) design. Steel tips in ball bearings produced in-house form its bearing for vertical movement, and the internal wiring is the company's E(asy)motion Wire tonearm cabling. Its carbon fibre reinforced headshell carries the cartridge, pre-mounted and adjusted at the factory. A viscosity-damped tonearm lift is included.

Start and stop work automatically, together with the tonearm movement to the record and back to its rest. While the record is playing, the automatic system is completely disengaged from the platter and tonearm. Cable, dust cover and a singles adapter are supplied with the turntable.

Pairing

A phono stage with an MM input is required, either a separate phono preamplifier or the phono input of an amplifier. The ground cable connects to the ground terminal of that phono stage.

Alternatives

The F400 sits above the F300 in Rekkord's automatic sub-chassis range, with 78 rpm and an Ortofon 2M Red cartridge.

Spezifikationen

  • Modellbezeichnung

    F300

  • Geschwindigkeit

    33/45

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    N/A

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    Audio Technica AT-91

  • Plattenteller

    N/A

  • Motor

    DC

  • Gleichlaufschwankungen (%)

    0,06

  • Signal-Rausch-Abstand (dB)

    65

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    430 x 130 x 365

  • Gewicht (kg)

    6.0

  • Offizieller Link

Weitere Komponenten