The Debut PRO B is a belt-drive turntable from Pro-Ject Audio Systems of Austria. It is the balanced version of the Debut PRO, the brand's 30th anniversary turntable released in 2021, and was launched in 2024. The PRO B adds a new cartridge, the Pick it PRO Balanced, and a mini XLR phono output, so it can be used with Pro-Ject's True Balanced Connection. Pro-Ject calls the Pick it PRO Balanced the first True Balanced MM cartridge of its kind.
Key specs that matter
Speeds are 33 and 45 rpm with electronic speed change, plus 78 rpm. The platter is 300 mm die-cast aluminium with TPE damping and a felt mat, on a stainless steel axle in a bronze bushing. Wow and flutter is ±0.16% at 33 rpm and ±0.14% at 45 rpm, and speed drift is ±0.40% and ±0.50%. Signal-to-noise ratio is 68 dB. Its one-piece carbon-aluminium tonearm has an effective length of 218.5 mm, an effective mass of 10.0 g and an overhang of 18.5 mm. Power consumption is 4 W, 0 W in standby. Dimensions are 415 x 113 x 320 mm (W x H x D), and weight is 6 kg net.
Engineering and use context
According to Pro-Ject, cartridges are balanced signal transducers by nature, but the internal wiring of typical MM cartridges did not give access to that balanced signal. The Pick it PRO Balanced has been modified to access all of it. Besides the mini XLR socket, the deck keeps standard RCA outputs for single-ended phono stages.
The tonearm is a carbon-aluminium sandwich. Its carbon layer gives the arm rigidity, and the inner aluminium tube damps it. The bearing block is CNC-milled from a single block of aluminium and nickel-coated, and the redesigned arm base allows azimuth and VTA adjustment, with arm height set after loosening two grub screws. All CNC-milled aluminium parts carry a nickel finish, and Pro-Ject avoids plastics that age over time.
An electronically regulated synchronous motor drives the platter, with a toggle switch for speed change and a round belt supplied for 78 rpm. The die-cast platter is precision balanced in an extra step, is anti-magnetic and has a TPE ring on the inside. A notch for the record label takes the separately available Record Puck PRO. The plinth stands on three height-adjustable damped aluminium feet. A 15 V DC/0.8 A power supply, dust cover, 78 rpm round belt and single adapter are included.
Pairing
A phono stage is required. The matching True Balanced phono stages are the Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B and Phono Box RS, connected with a separately available True Balanced cable. Through the RCA outputs, any MM phono input can be used.
Alternatives
The X1 B is a Pro-Ject belt-drive turntable with the same Pick it PRO Balanced cartridge, a larger chassis, a cardan four-point tonearm bearing and a one-piece acrylic platter.