The Air Force III Premium S is a belt-drive turntable with an air bearing from TechDAS of Japan. Announced in December 2021, it is a variant of the Air Force III Premium and differs from it in its newly designed suspension feet, which replace the rigid type feet. TechDAS states that the new feet give more flexibility of installation in different environments and higher vibration isolation. The same feet are sold separately as a set of four for owners of the rigid-foot version.
Key specs that matter
Speeds are 33.3 and 45 rpm, and wow and flutter is below 0.03%. The gunmetal platter weighs 29 kg, and total moment of inertia is 3,506 kg cm2. Drive is by a polished, nonflexible polyurethane fibre belt from an AC synchronous motor. Main unit dimensions are 473 x 170 x 363 mm (W x H x D), with a minimum setup footprint of 564 x 413 mm, and total weight is 55 kg. The Pump / Power Supply / Air Condenser Unit measures 430 x 175 x 370 mm, weighs 14 kg and has a power consumption of 50 W.
Engineering and use context
Two units make up the system - the Main Unit with its outboard motor, and the Pump / Power Supply / Air Condenser Unit. Gunmetal is an alloy of copper and tin. The platter is precision cast with a solid rather than hollow structure, then given a precision coating and highly polished. At 29 kg it is more than three times the weight of the 9 kg aluminium platter in the original Air Force III. Its chassis is CNC-machined A5056 aluminium alloy weighing 21 kg, black anodised and high-gloss polished, and it accepts up to four tonearms from 229 mm to 305 mm nominal length.
In the TechDAS air bearing the platter floats on air and is isolated from floor vibration transmitted through the chassis and centre spindle. Platter weight places no load on the bearing, and TechDAS specifies maintenance-free operation. A vacuum LP hold down flattens warped records onto the platter at a low, controlled pressure rather than a high vacuum.
Two 150 W DC power amplifiers drive the motor. Once the selected speed is reached, motor torque drops automatically to below 50%, and no servo control is used from that point. A sensor monitors rotational speed and returns the data to the motor if a correction is needed. The motor sits in a separate high-gloss black anodised chassis.
Pairing
A tonearm and a phono stage are required. The supplied tonearm base comes drilled for the arm specified with the order, and extra arm bases and a disc stabilizer are optional. A platter cover, cables, air hoses and platter setup tools are also included.
Alternatives
The TechDAS Air Force III Premium is the same turntable on rigid type feet.