The Air Force One is a belt-drive turntable from TechDAS, the Japanese company founded by Hideaki Nishikawa. It combines an air bearing, vacuum disc suction and air suspension feet in one chassis. TechDAS calls it an arm-free design, so no tonearm is incorporated. The finish is hard anodised aluminium.
Key specs that matter
Drive is by a 4 mm wide non-stretch flat belt of polished polyurethane fibre from an AC synchronous motor, with speed controlled by a DC amplifier. Speeds are 33 1/3 and 45 rpm, with pitch adjustment of up to ±10% in 0.1% steps. Wow and flutter is below 0.03% (W.R.M.S.). The main platter is forged SUS316L non-magnetic stainless steel, 310 mm in diameter, 54 mm high and 19 kg in weight, and it carries a 4 kg upper platter of A7075 aluminium alloy. Total weight is 79 kg on a minimum footprint of 680 x 480 mm (W x D). A separate power supply unit measures 430 x 175 x 370 mm (W x H x D), weighs 14 kg and consumes 60 W.
Engineering and use context
Air pressure floats the heavy platter above the base, and no conventional bearing system as such is required. The main platter has a 40 mm thick perimeter for a large inertia force in rotation. Inside the upper platter is an air chamber of 1.1 litres for the vacuum disc suction, which is switched on with one press of the SUCTION button after a record is set on the platter.
Its 6.6 kg motor sits in a separate aluminium housing and is driven by an automatic revolution adjustment circuit. The chassis base is a three-layer construction, with A5052 aluminium alloy at the bottom and top and anodised A7075 in the middle, and it weighs 43 kg. Three large feet support the turntable, and their internal air suspensions allow level adjustment of the main body and a change of damping characteristics.
The power supply unit holds a motor-powered air pump in a die-cast case, an air condenser and four separate supplies, for the motor drive, the rotation control circuit, the operating circuit and the LEDs. Placing these in their own unit isolates them from the turntable main body.
Pairing
A tonearm and cartridge are required. A tonearm of 10-inch effective length mounts on the right side as standard. An optional arm base on the far left takes a tonearm of 12-inch effective length.
Alternatives
The Air Force One Premium is the upgraded version, with a motor-driven air charging system, a double-capacity air condenser and a choice of A7075 or pure titanium upper platter.