Hifiverse

Plattenspieler - Burmester 217

Beschreibung, Bilder, technische Daten und Spezifikationen

Burmester 217
Bildquelle - (c) Burmester

The 217 is a belt-drive turntable in the Top Line of Burmester, the Berlin company founded by Dieter Burmester in 1977. It was only the second turntable in the history of the firm, after the 175 of the Reference Line. The 217 is supplied with its tonearm and cartridge already mounted and pre-calibrated at the factory. In the UK it was priced at GBP 18,700.

Key specs that matter

It runs at two speeds, 33 and 45 rpm. Its tonearm is gimbal-mounted, with an effective length of 239.1 mm from the bearing to the stylus tip, and the cartridge has a Shibata stylus. Dimensions are 482 x 165 x 283 mm (W x H x D), and weight is 31.5 kg. The power supply accepts 100 - 240 V AC, 50/60 Hz. Power consumption is 11.8 W at 33 rpm and 6.9 W (100 V) or 7.4 W (240 V) at 45 rpm. In standby it is 0.09 W (100 V) or 0.12 W (240 V), and switched off 0.05 W or 0.07 W.

Engineering and use context

Burmester uses a massive, low-resonance unibody housing made of solid aluminium. The platter is driven by two belt drive motors. Three height-adjustable feet carry the housing.

Its arm is a straight tonearm, and the offset comes from the geometry of the headshell rather than from a bent arm tube. Burmester specifies a unidirectional fibre composite material in combination with aluminium components for the arm. The tonearm leaves the factory pre-calibrated and normally needs no further adjustment. If required, the anti-skating mechanism can be checked and set with the Burmester Reference Check record.

From the cartridge the signal runs directly through a phono connection cable, which is supplied and ends in XLR plugs for the left and right channels. A slipmat of composite leather and a care kit come with every 217. Its power supply adapts automatically to the mains voltage, and the front panel is finished in Burmester chrome.

Pairing

A phono preamplifier with balanced XLR inputs, or an amplifier with a built-in phono stage, is required. The matching Burmester phono preamplifier is the 100.

Alternatives

The Burmester 175 is the Reference Line turntable above the 217.

Spezifikationen

  • Modellbezeichnung

    217

  • Geschwindigkeit

    N/A

  • Antrieb

    Belt

  • Subchassis/Aufhängung

    Fixed

  • Tonarm vorinstalliert

    Ja

  • Tonarmmodell

    N/A

  • Tonabnehmer vorinstalliert

    Ja

  • Tonabnehmermodell

    N/A

  • Plattenteller

    N/A

  • Motor

    N/A

  • Gleichlaufschwankungen (%)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Rumpelgeräusch (-dB)

    N/A

  • Abmessungen (mm)

    165 x 482 x 283

  • Gewicht (kg)

    31.5

  • Offizieller Link

Weitere Komponenten