The 175 is the first turntable from Burmester Audiosysteme of Berlin and belongs to the company's Reference Line. It comes with a pre-installed tonearm and an integrated MC phono stage, and its output is a balanced XLR connection. Its US price is USD 91,000, and the later 217 of the Top Line was inspired by the 175.
Key specs that matter
Belt drive uses four AC synchronous motors, with speeds of 33 1/3 and 45 rpm. Its platter is a CLD (constrained-layer damping) design of aluminium, brass and aluminium. A hybrid steel and ceramic main bearing supports it. A 9-inch tonearm has a multi-layer carbon arm tube in a gimbal mount, with an effective length of 238.2 mm, an overhang of 16.2 mm and an arm weight of 0.7 kg. Phono gain is 70 dB at 1 kHz. Frequency response is 16 Hz - 102 kHz (+0.2/-3 dB), with a subsonic filter at 16 Hz. Output noise is -71 dBV (unweighted, 22.4 kHz bandwidth), and THD is 0.0018% (1 kHz, 0.5 mV). MC input impedance is selectable between 4.7 kohms, 1 kohm, 470, 330, 220 and 100 ohms. Without the power supply, the main unit measures 450 x 250 x 395 mm (W x H x D, height with base plate) and weighs 60.8 kg.
Engineering and use context
Four motors sit in the outer square around the sub-platter. Multiple belts are used so that no irregular tension arises on the central bearing. The AC synchronous motors are driven by digital motor electronics.
Channel deviation of the phono stage is below 0.1 dB. Power comes from an external power supply unit. On the tonearm, azimuth is set with clamp screws and tracking force by a fine thread.
Pairing
A preamplifier or integrated amplifier with a balanced XLR line input is required. The phono stage has MC loading only, so a moving-coil cartridge is required.
Alternatives
The 217 is Burmester's Top Line turntable.