Hifiverse

Phonovorstufen - Pro-Ject Tube Box DS3 B

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject Tube Box DS3 B
Bildquelle - (c) Pro-Ject

The Tube Box DS3 B is a dual mono balanced tube phono preamplifier from Pro-Ject Audio Systems, designed and handmade in Europe. It adds balanced inputs and outputs to the Tube Box series, and its circuit technology comes from Dr. Sykora. MSRP was EUR 899 including VAT. Finishes are silver or black, with magnetic wooden side panels available separately.

Key specs that matter

Tube complement is two E88CC (6922). Gain is 40, 45, 50, 55, 60 or 65 dB, plus 6 dB at the XLR output. Input impedance is stepless from 10 to 1000 ohms or fixed at 47 kohms, and capacitance is 50, 150, 300 or 400 pF. Output voltage is typically 500 mV at 1 kHz for 5 mV input (40 dB). Signal-to-noise ratio is above 87 dBV (A-weighted), THD is below 0.03% and RIAA curve accuracy is ±0.5 dB (20 Hz - 20 kHz). A subsonic filter works at 20 Hz with 18 dB per octave. Inputs are one 5-pin mini XLR, one pair of XLR and one pair of RCA phono sockets, and outputs are one pair of RCA and one pair of XLR. Power supply is 18 V/1000 mA DC, consumption is max. 750 mA DC and below 0.5 W in standby. Dimensions are 206 x 70 x 194 mm (W x H x D), and weight is 1560 g without power supply.

Engineering and use context

Two turntables can be connected at the same time. All settings are made on the front plate, and each input has its own settings stored in memory. Load impedance is set continuously with a potentiometer, a system Pro-Ject says it invented, and can be adjusted during playback.

Balanced transmission consists of a hot and a cold signal carrying the same information. According to Pro-Ject, the DS3 B extracts the signal from the + and - legs and removes the noise added along the transmission. The turntable connects either through the 5-pin mini XLR cable or through standard XLR cables. Its E88CC tubes are specified for low noise and low microphonics. Components include a tube output stage and polypropylene capacitors, and an aluminium casing protects against interference.

Pro-Ject uses an outboard adapter to keep radiating parts away from the amplifier circuit, and legal requirements make it a switch mode type. A linear outboard supply is the upgrade, and Pro-Ject names the Power Box DS2 Sources for this.

Pairing

MM and MC cartridges are supported. The XLR outputs require a balanced preamplifier or amplifier input, and the RCA pair a line-level input. Turntables with a 5-pin mini XLR or XLR output allow a balanced connection.

Alternatives

The Pro-Ject Tube Box S2 is the compact unbalanced tube phono preamplifier of the S2 line, with two ECC83 tubes and a FET input stage.

Spezifikationen

  • Modellbezeichnung

    Tube Box DS3 B

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    10-1000, fix 47 000

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40 / 45 / 50 / 55 / 60 / 65

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    < 0,03

  • Abmessungen (mm)

    206 x 70 x 194

  • Gewicht (kg)

    1.56

  • Offizieller Link