Hifiverse

Phonovorstufen - Pro-Ject Phono Box RS2

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject Phono Box RS2
Bildquelle - (c) Pro-Ject

The Phono Box RS2 is a fully balanced, fully discrete MM/MC phono preamplifier that Pro-Ject Audio Systems places in its reference class. It is balanced from input to output in a true dual mono layout, and no op-amps are used in the circuit. MSRP is EUR 1,599 including VAT, and the unit is available in silver or black.

Key specs that matter

Inputs are one pair of RCA and one pair of XLR sockets, and outputs are RCA and XLR as well. MM gain is 40, 43, 46 or 50 dB and MC gain 60, 63, 66 or 70 dB on the RCA outputs, with 6 dB more on XLR. In MM mode impedance is fixed at 47 kohms and capacitance is switchable in eight steps from 50 to 400 pF. MC impedance is stepless from 10 to 1,000 ohms, with capacitance fixed at 50 pF. Signal-to-noise ratio is 89 dB A-weighted for MM (40 dB, 10 mV) and 79 dB A-weighted for MC (60 dB, 1 mV). THD is below 0.0015% (MM 40 dB, 1 kHz) and below 0.0024% (MC 60 dB, 1 kHz). RIAA accuracy is within 0.4 dB (20 Hz - 20 kHz), and the subsonic filter works at 20 Hz with 18 dB/octave. Power comes from a 20 V/3 A DC supply (110 - 240 V, 50/60 Hz), consumption is max. 350 mA DC, and standby is below 1 W. It measures 206 x 72 x 200 mm (W x H x D), or 230 mm deep with sockets, and weighs 1,600 g without the power supply.

Engineering and use context

The + and - sections of each channel are treated individually, doubling the number of amplifier sections, and noise picked up along the transmission is subtracted. Active parts are transistors. Equalisation is split passive for both the RIAA and DECCA curves, and either curve can be selected. Load impedance in MC mode is set continuously by a potentiometer, a system Pro-Ject invented, and can be adjusted during playback. A balance control shifts the centre by up to 2 dB to the left or right and can be switched out of the signal path.

Two turntables can be connected, one per input, and the settings for each input are stored in memory. Both outputs are active at the same time. An automatic mute suppresses clicks during power-up and setting changes. The chassis is steel covered by screwed aluminium panels. Pro-Ject offers the Power Box RS2 Phono, a linear supply in a cabinet the size of the preamplifier, as an upgrade.

Pairing

The XLR input requires a turntable with a balanced output. Its XLR outputs connect to a balanced line input, and two amplifiers can be connected at once.

Alternatives

The Phono Box DS3 B is the DS3-line model with fully balanced gain stages, stepless impedance setting and memory for two turntables.

Spezifikationen

  • Modellbezeichnung

    Phono Box RS2

  • Eingänge (symmetrisch)

    1

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    Fixed 47 000, variable 10 - 1000

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40, 43, 46, 50 (MM), 60, 63, 66, 70 (MC)

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    <0.0015 (MM), 0.0024 (MC)

  • Abmessungen (mm)

    206 x 72 x 200

  • Gewicht (kg)

    1.6

  • Offizieller Link