Hifiverse

Phonovorstufen - Pro-Ject Phono Box S2 Ultra

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject Phono Box S2 Ultra
Bildquelle - (c) Pro-Ject

The Phono Box S2 Ultra is a discrete MM/MC phono preamplifier from Pro-Ject Audio Systems. Pro-Ject introduced it into the regular S2 line after the Phono Box Ultra 500, from which the circuit is taken. MSRP was EUR 249 including VAT, and the unit is available in silver or black.

Key specs that matter

Gain is switchable in four steps - 40, 43, 60 and 63 dB. Input impedance is 10 ohms, 100 ohms, 1 kohm or 47 kohms, and input capacitance is 100 or 220 pF. A switchable subsonic filter gives -18 dB at 20 Hz. Signal-to-noise ratio is 89 dBV (MM), THD is 0.00052% and RIAA accuracy is better than 0.4 dB (20 Hz - 20 kHz). In and out sockets are one pair of RCA connectors each. Power consumption is 18 V/80 mA, and the outboard power supply is rated 18 V DC/500 mA. Dimensions are 103 x 37 x 119 mm (W x H x D), and weight is 570 g without power supply.

Engineering and use context

Its circuit is fully discrete, with no operational amplifiers. Pro-Ject first used an op-amp-free discrete design in the Tube Box S2. Polystyrene capacitors are used in the S2 Ultra, and the RIAA equalisation is split for accurate tracking of the RIAA curve. A solid metal casing protects the circuit against interference.

Input gain, capacitance and impedance are set with DIP switches on the bottom of the unit, both channels set equally and the unit disconnected from power. Per the manual, 40 and 43 dB are the typical gain settings for MM or high-output MC cartridges, and 60 and 63 dB for low-output MC types. Input capacitance has no relevance for low-output MC cartridges. On the rear panel a separate switch activates the subsonic filter, and a screw terminal takes the tonearm earth wire. A front button switches between operation and standby, with a blue LED.

Compared with the standard Phono Box S2, which uses amplification modules and WIMA polypropylene capacitors, the Ultra has a steeper -18 dB subsonic filter and two capacitance values instead of four. Accu Box S2 is the compatible upgrade power supply.

Pairing

A line-level input (AUX, CD, tuner) on the amplifier is required, never a phono input. Its loading options cover MM cartridges as well as high- and low-output MC cartridges.

Alternatives

The Pro-Ject Phono Box S2 is the standard MM/MC phono preamplifier of the S2 line.

Spezifikationen

  • Modellbezeichnung

    Phono Box S2 Ultra

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40 / 43 / 60 / 63

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Klirrfaktor + Rauschen (%)

    <0.00052

  • Abmessungen (mm)

    103 x 36 x 104

  • Gewicht (kg)

    0.570

  • Offizieller Link