Hifiverse

Phonovorstufen - Pro-Ject Phono Box

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject Phono Box
Bildquelle - (c) Pro-Ject

The Phono Box is an MM/MC phono preamplifier with line output from Pro-Ject Audio Systems of Vienna, Austria, listed by the company as a best buy classic in its Box Design range. It is intended for amplifiers without a dedicated phono cartridge input, and its analogue output connects to a line input such as AUX. MSRP is EUR 129 including VAT, and the faceplate is available in black or silver.

Key specs that matter

A switch on the rear panel selects MM or MC operation. In MM mode the input impedance is 47 kohms/120 pF and gain is 40 dB, with a typical output of 300 mV at 1 kHz from a 3 mV input. MC mode uses 100 ohms/120 pF and 60 dB, giving the same 300 mV from 0.3 mV. Maximum output is 9.5 V (1 kHz). Pro-Ject quotes a noise floor of 94 dBA (MM) and 75 dBA (MC), with THD of 0.01% (MM) and 0.05% (MC). RIAA equalisation curve accuracy is max. 0.5 dB (20 Hz - 20 kHz). Input and line-level output are one pair of gold-plated RCA sockets each. An outboard 18 V/200 mA DC supply powers the unit, consumption is 80 mA DC, and standby power is under 1 W. Dimensions are 103 x 36 x 104 mm (W x H x D), or 115 mm deep with sockets, and weight is 570 g.

Engineering and use context

Its MM position covers moving magnet and high-output MC cartridges, while the MC position is for low-output MC types. Units leave the factory set to MM. According to Pro-Ject, the mode is changed only with the unit disconnected from the power supply and the amplifier.

Gain is provided by low noise ICs, and the output stage has an ultra-low impedance. A screw terminal takes the earthing wire of the tonearm lead if hum appears with the record player.

Pairing

The output connects to a line input such as AUX, CD, Tuner or Tape, never to a phono input of the amplifier. MM and high-output MC cartridges require the MM position, and low-output MC cartridges require the MC position. Only the supplied power supply is to be used.

Alternatives

The Phono Box S2 is the next model up in the Box Design range, with four gain settings, switchable input impedance and capacitance and a subsonic filter.

Spezifikationen

  • Modellbezeichnung

    Phono Box

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    N/A

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    100

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    40 (MM) + 60 (MC)

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Klirrfaktor + Rauschen (%)

    0.01 (MM) + 0.05 (MC)

  • Abmessungen (mm)

    103 x 36 x 104

  • Gewicht (kg)

    0.570

  • Offizieller Link