Hifiverse

Phonovorstufen - Vitus Audio MP-P201 Mk.III

Beschreibung, Bilder, technische Daten und Spezifikationen

Vitus Audio MP-P201 Mk.III
Bildquelle - (c) Vitus Audio

The MP-P201 Mk.III is a two-chassis phono stage from Vitus Audio, the Danish company founded by Hans-Ole Vitus in Herning. It belongs to the MP line at the top of the Vitus range. The audio circuit sits in one aluminium chassis and the power supply in a second one, and the Mk.III version uses the discrete gain stage modules developed for the MP-L201 line preamplifier.

Key specs that matter

Inputs are two balanced XLR pairs and two RCA pairs, and outputs are one XLR pair and one RCA pair. MC gain is 50 - 75 dB in ten steps (50, 53, 55, 57, 60, 63, 67, 70, 72 and 75 dB). MM gain is 20 - 47 dB in eleven steps. MC loading offers 21 values from 10 ohms to 2 kohms, while the MM load range runs from 10 ohms to 47 kohms. Output impedance is 80 ohms on both outputs. Frequency response extends to 800 kHz, signal-to-noise ratio is above 110 dB (1 kHz) and THD+N is below 0.01%. Power consumption is 110 W in operation. Each chassis is 135 mm high and 435 mm wide. Depth is 470 mm for the phono stage including binding post and 435 mm for the PSU, and the two weigh 22 kg and 31 kg.

Engineering and use context

Vitus builds the gain stages as discrete modules. For the MP-P201 these modules, taken from the MP-L201, were optimised for a much lower noise level. According to Vitus, the external power supply reduces the noise floor.

Moving magnet, moving coil and mono cartridges are all supported. Gain and load are changed from the front panel or by remote control.

Pairing

A line preamplifier with a balanced XLR or RCA input is required. The matching line stage is the Vitus MP-L201. A tonearm with balanced XLR wiring connects to one of the two XLR inputs. The two inputs of each type allow two tonearms or two turntables to stay connected.

Alternatives

The Vitus Audio SP-103 is the phono stage of the Signature series.

Spezifikationen

  • Modellbezeichnung

    MP-P201 Mk.III

  • Eingänge (symmetrisch)

    2

  • Eingänge (unsymmetrisch)

    2

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    N/A

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    0

  • Obere Grenzfrequenz +/- 3dB (Hz)

    800000

  • Klirrfaktor + Rauschen (%)

    0.01

  • Abmessungen (mm)

    135 x 435 x 435 + 135 x 435 x 470

  • Gewicht (kg)

    22 + 31

  • Offizieller Link

Weitere Komponenten