Hifiverse

Phonovorstufen - Rega FONO MM MK5

Beschreibung, Bilder, technische Daten und Spezifikationen

Rega FONO MM MK5
Bildquelle - (c) Rega

The Fono MM MK5 is a dedicated moving magnet phono stage from Rega Research of Southend-on-Sea, England. Rega launched it on 15 November 2021 together with the Fono MC MK4, at GBP 220 or USD 445. This version is housed in a redesigned aluminium case shared with the Fono MC and the Neo turntable power supply. It is designed and assembled in the UK and carries Rega's lifetime limited warranty against manufacturing defects.

Key specs that matter

Gain is 41.4 dB at 1 kHz. Input sensitivity is 1.7 mV for 200 mV output, and input loading is 47 kohms in parallel with 100 pF. Maximum input level is 60 mV at 1 kHz. Output impedance is 200 ohms, with a recommended minimum output load resistance of 5 kohms. Frequency response is 15 Hz (-3 dB) to 100 kHz (-0.2 dB) into a 50 kohm output load, and RIAA accuracy into the same load is better than ±0.2 dB from 100 Hz to 100 kHz. Power requirement is 24 V AC at 80 mA maximum, supplied by the external Rega PS1 power supply rated at 24 V AC and 350 mA.

Engineering and use context

Its input stage is a fully discrete, cascaded, complementary amplifier stage, a configuration Rega chose to optimise the performance of a moving magnet cartridge. Rega has split the RIAA equalisation into two stages to minimise interaction between them. Polyester capacitors are used in the signal path, and polypropylene capacitors are used in the RIAA equalisation circuits.

On the rear panel are the input sockets for the tonearm leads, the output sockets, a turntable earth terminal and the AC socket for the PS1. A turntable or tonearm with a separate signal earth lead connects to that terminal. Power is switched with an on-off button on the front, and the Rega logo glows red when the unit is active. Rega advises switching the Fono on before the amplifier, since the power surge at switch-on could otherwise cause an audible thump in the speakers. The PS1 is supplied in UK, EU, Australian, Korean, US and Japanese versions, each with a 24 V AC output.

Pairing

A turntable with a moving magnet cartridge is required. The output connects to a line-level input of the amplifier. According to Rega, the Fono must not be connected to the phono input of an integrated amplifier that already has a built-in phono stage. Rega lists its Planar 1, Planar 2, Planar 3, Planar 6 and Planar 8 turntables as complementary components.

Alternatives

The Rega Fono Mini A2D is a smaller moving magnet phono stage from the same range, with a USB output for analogue-to-digital recording.

Spezifikationen

  • Modellbezeichnung

    FONO MM MK5

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    47 000

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    200

  • Verstärkung (dB)

    41.4

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    15

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    78 x 45 x 140

  • Gewicht (kg)

    1

  • Offizieller Link

Weitere Komponenten