Hifiverse

Phonovorstufen - Rega FONO MC MK4

Beschreibung, Bilder, technische Daten und Spezifikationen

Rega FONO MC MK4
Bildquelle - (c) Rega

Fono MC MK4 is a dedicated moving coil phono stage from Rega, announced on 15 November 2021 together with the Fono MM MK5 and the Neo MK2 power supply, at GBP 249. Rega designed it to complement its own MC cartridges, and adjustable gain and loading make it compatible with a wide range of third party low output MC cartridges. For the MK4 version it received the same new aluminium case as the Neo MK2 PSU and the Fono MM MK5.

Key specs that matter

Gain at 1 kHz is 63.5 dB or 69.5 dB, selected by DIP switch 4. Input sensitivity for 200 mV output is 133 µV at the lower gain setting and 67 µV at the higher one, and maximum input level at 1 kHz is 6.7 mV and 3.4 mV respectively. Switches 1 and 2 set the input loading resistance to 400, 150, 100 or 70 ohms, while switch 3 selects a loading capacitance of 1000 pF or 4300 pF. Factory settings for all Rega MC cartridges are 100 ohms, 1000 pF and high gain. Frequency response is 13 Hz (-3 dB) to 100 kHz (-0.3 dB), and RIAA accuracy is better than ±0.2 dB from 100 Hz to 100 kHz, both into a 50 kohm output load. Output impedance is 200 ohms, with a recommended minimum output load resistance of 5 kohms. Power requirement is 24 V AC at 150 mA maximum, and Rega specifies the external PS1 power supply for it.

Engineering and use context

An all discrete input stage uses the Linear Systems LSK389 low noise FET. According to Rega, the high input impedance of the FET keeps the loading effects of the amplifier circuit minuscule, so they do not affect the performance of the cartridge. A MUSE operational amplifier is used in the RIAA equalisation amplifier. Polypropylene capacitors are used in the signal path and in the RIAA equalisation circuits. Rega states that this circuit resulted from development work carried out on its Aria phono amplifier.

All four DIP switches for gain and loading are located on the rear panel. On the back of the unit is a turntable earth terminal for the separate signal earth lead of a turntable or tonearm. An on-off button is on the front, and the Rega logo glows red when the unit is active. Rega advises turning the Fono on before the amplifier, as the power surge at switch-on could otherwise cause an audible thump. The unit carries Rega's lifetime warranty against manufacturing defects.

Pairing

A turntable with a low output MC cartridge is required. The output connects to a line input with a load of at least 5 kohms, never to the built-in phono input of an integrated amplifier. Rega MC cartridges work at the factory settings, and the case matches the Fono MM MK5 and Neo MK2.

Alternatives

The Rega Aos MC is a higher-positioned MC phono stage, with 69.3 dB or 63.5 dB of gain and the same 70 to 400 ohm loading range.

Spezifikationen

  • Modellbezeichnung

    FONO MC MK4

  • Eingänge (symmetrisch)

    N/A

  • Eingänge (unsymmetrisch)

    1

  • MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    400 / 150 / 100 / 70

  • MM/MC-Eingangsimpedanz (spannungsgekoppelt) (Ω)

    N/A

  • Ausgangsimpedanz (Ω)

    200

  • Verstärkung (dB)

    N/A

  • Genauigkeit der Wiedergabe-Entzerrungskurven (dB)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    13

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Klirrfaktor + Rauschen (%)

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten