The Allnic Audio Rose is a moving-coil phono cartridge launched in 2020 as the less expensive partner of the Amber, and Kang Su Park, the designer who founded Allnic Audio in Korea, builds every sample himself. The company name stands for all nickel, after the nickel alloy cores in the transformers of its amplifiers. Its American list price was USD 2,900. The name matches the colour of the housing, which is finished in a rose tone and carries the word Rose in white lettering on its right side. Like its sibling, it follows the idea of a record-cutting head, except that its diamond reads the groove walls rather than carving them.
Key specs that matter
Rated output is 0.4 mV at 5 cm/s, and the coils present an internal impedance of 9 ohm. Allnic quotes a response of 20 Hz to 30 kHz, separation above 30 dB at 1 kHz and channel balance within 0.1 dB. Compliance measures 10 x 10-6 cm/dyne at 100 Hz, and Allnic sets tracking force at 2.0 g, with a permitted window of 0.2 g either way. Its stylus is a Fritz Gyger 2 diamond fixed to a solid aluminium cantilever, while the housing is 5052 duralumin. Total weight comes to 11 g.
Engineering and use context
Only the stylus tip and the cantilever separate the Rose from the Amber, which uses a Fritz Gyger S on boron. The rest of the construction is common to both. The coils sit on a pair of hollow polycarbonate bobbins in place of the single iron former found in many moving-coil pickups. Because polycarbonate is far lighter, the moving assembly carries less mass. Copper-clad aluminium wire forms the twin coils, a Neodymium 50 magnet supplies the field, and a rubber damper of Allnic's own development holds the cantilever. Two screws on the top fix the cartridge to the headshell, and four standard pins take the tonearm leads.
Pairing
A signal under half a millivolt needs serious moving-coil gain ahead of the line stage, so the Rose belongs on an MC input with a head amplifier or on a step-up transformer. The low internal impedance makes it a straightforward match for transformers with higher step-up ratios, such as those built into the Allnic tube phono stages. Given the moderate compliance and the solid metal body, an arm with a middling to heavy effective mass and enough counterweight travel for an 11 g pickup is the logical home.
Alternatives
The Allnic Amber is the other current cartridge from the brand, sharing this platform but pairing a Fritz Gyger S tip with a boron cantilever.