Hifiverse

Tonabnehmer - Allnic Audio Amber

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio Amber
Bildquelle - (c) Allnic Audio

The Allnic Audio Amber is a low-output MC pickup made in Korea by the firm that designer Kang Su Park set up and that is better known for tube amplifiers and phono stages. It arrived in 2020 together with the less costly Rose, and it sits above that model. Allnic took the cutting head of a lathe used for LP masters as its template, with one difference - a diamond stylus follows the walls of the groove where the lathe uses a chisel to cut them. Earlier Allnic pickups, the Puritas with an ebony body and the Verito Z with a wooden one, are no longer in the range.

Key specs that matter

The Amber delivers 0.35 mV at 5 cm/s and 1 kHz from an internal impedance of 9 ohm. Its frequency range runs from 20 Hz to 30 kHz, channel separation exceeds 30 dB, and compliance is 10 x 10-6 cm/dyne at 100 Hz. Allnic specifies a tracking force of 2.0 g. The tip is a Fritz Gyger S diamond carried by a cantilever of solid boron, while the body is made of 5052 duralumin with a gold-toned finish. The cartridge weighs 11 g.

Engineering and use context

Most moving-coil designs wind both channels on one iron former. The Amber instead carries two separate hollow bobbins made of polycarbonate, which weighs far less than iron. With less mass to move, Allnic could place the coils nearer to the stylus than a conventional layout allows. The windings are copper-clad aluminium, the magnet is a Neodymium 50 grade, and the suspension uses a new rubber damper developed in-house by Allnic. Threaded holes at standard spacing take the mounting screws. The box holds four screws with a key, a removable plastic stylus guard, a small bubble level for setting up the headshell, a metal storage canister and a printed sheet of specifications.

Pairing

Output this low calls for real moving-coil gain in front of the line stage, either from an active MC input or from a step-up transformer. Allnic's own tube phono preamps fit that role, as their built-in Permalloy step-up transformers offer several ratios for low-impedance coils like these. The moderate compliance and the 11 g body favour tonearms of medium to higher effective mass, and the arm's counterweight needs enough range to level a pickup of this weight at the specified downforce.

Alternatives

Within the Allnic cartridge range, the Rose shares the duralumin housing and coil design at a lower price, using a Fritz Gyger 2 tip on an aluminium cantilever.

Spezifikationen

  • Modellbezeichnung

    Amber

  • Typ

    MC

  • Nadel

    Fritz Gyger S

  • Gehäuse

    Duralumin 5052

  • Nadelträger

    N/A

  • Spulen

    N/A

  • Ausgangsspannung (mV@5cm/sec)

    0.35

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Innenwiderstand (Ohm)

    9

  • Kanaltrennung (dB / 1,000 Hz)

    30

  • Nadelnachgiebigkeit (×10-6cm/dyne at 100Hz)

    10

  • Empfohlene Abschlussimpedanz (Ohm)

    N/A

  • Empfohlene Tonarme

    N/A

  • Gewicht (g)

    11

  • Offizieller Link

Weitere Komponenten