Hifiverse

DACs - Gryphon Audio KALLIOPE

Beschreibung, Bilder, technische Daten und Spezifikationen

Gryphon Audio KALLIOPE
Bildquelle - (c) Gryphon Audio

The Kalliope is a dual-mono digital-to-analogue converter from Gryphon Audio Designs, the Danish company Flemming E. Rasmussen founded in 1985. Launched in 2014 and named after the Greek muse, it is designed and built in Denmark. Its analogue circuits are balanced, Class A and DC-coupled, with no negative feedback, and the construction is modular.

Key specs that matter

Conversion uses two ESS Sabre ES9018 32-bit/384 kHz chips. Inputs are one balanced 110 ohm AES/EBU on XLR, three 75 ohm S/PDIF on BNC and USB. The XLR and BNC inputs accept PCM from 22 to 192 kHz. Via USB the Kalliope takes PCM from 44.1 to 384 kHz, plus DSD64 and DSD128 on Mac and up to DSD512 on Windows. Analogue outputs are one XLR and one RCA per channel, at a maximum of 4.3 V RMS balanced and 2.15 V RMS single-ended, with 30 ohms output impedance. Signal-to-noise ratio is better than 115 dB unweighted (20 Hz - 20 kHz) and 118 dB A-weighted. THD+N is below 0.007% at 0 dB and below 0.0025% at -6 dB, and bandwidth is 0 - 192 kHz (-3 dB). The chassis measures 480 x 135 x 387 mm (W x H x D) and weighs 10.6 kg.

Engineering and use context

Power supply capacity is 2 x 35,000 µF, and consumption is 50 W at idle, 54 W maximum and under 0.5 W in standby. The USB module runs from its own SuperCap supply, and a blinking blue LED shows it charging. A de-jittered AES/EBU output on XLR carries whichever of inputs 1 to 4 is selected. BNC word clock connections (75 ohms) accept an external reference of 0.5 - 5 Vpp at 22 - 192 kHz, and word clock is enabled in the menu.

For PCM the digital filter is slow roll-off with short group delay by default, or sharp roll-off with long group delay. DSD has 50, 60 or 70 kHz (-3 dB) filters and a switchable first-order analogue low-pass. Optional upsampling converts PCM below 200 kHz to 210 kHz. Front touch buttons and the menu cover absolute phase inversion, a standby timer from 30 minutes to off, output attenuation of 0 or -6 dB, display brightness in five steps and input names of up to eight characters.

Mac OS X 10.6 and later and Linux with UAC2 need no USB driver. A 12 V link input and output switch the Kalliope between standby and on together with other components, and its software is upgradeable. Each Kalliope comes with a power cord, gloves, a cleaning cloth and acrylic polish, and the warranty runs for two years.

Pairing

A line-level preamplifier or integrated amplifier with balanced XLR or RCA inputs is required. The word clock input accepts an external master clock.

Alternatives

The DAC3 is a further standalone D/A converter in Gryphon's range.

Spezifikationen

  • Modellbezeichnung

    KALLIOPE

  • Wandlungstyp

    N/A

  • Wandlerchip

    ESS SABRE ES9018

  • DSD-Kompatibilität

    Ja

  • Parameter

    up to 32 bit / 384 kHz and DSD128

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    30

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    30

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    <0,0070

  • Abmessungen (mm)

    480 x 135 x 387

  • Gewicht (kg)

    10.6

  • Offizieller Link