The E50 II is a compact desktop DAC from the Chinese maker TOPPING, announced on 8 December 2025 at a regular price of USD 199. It is built on the AKM AK4497S chip from the VELVET SOUND family and works either in DAC mode or in preamp mode with adjustable output volume. Black, silver and white finishes are offered.
Key specs that matter
USB-C input uses the XMOS XU316 and accepts PCM 44.1 - 768 kHz at 16 - 32 bit, native DSD64 - DSD512 and DSD64 - DSD256 over DoP. A dual-format optical input reads S/PDIF and ADAT up to 192 kHz, and a coaxial input sits beside it. Bluetooth reception runs on a Qualcomm QCC5125 with LDAC, aptX Adaptive, aptX HD, aptX, AAC and SBC, up to 96 kHz / 24-bit. Measured from USB at 96 kHz, TOPPING quotes THD+N of 0.0001% (1 kHz, A-weighted) on both outputs, SINAD of 120 dB, and SNR and dynamic range of 131 dB balanced and 130 dB single-ended. Frequency response is 20 Hz - 20 kHz (±0.1 dB) and 20 Hz - 40 kHz (±0.3 dB). Noise is 1.7 µV single-ended and 3.0 µV balanced, with crosstalk of -130 dB at 1 kHz. The chassis measures 129 x 155 x 41 mm.
Engineering and use context
Coaxial and optical signals pass through an FPGA and PLL based TopSync circuit with JitterNull, and TOPPING gives jitter as low as -160 dB. On the optical port an FPGA-based detection engine recognises S/PDIF or ADAT automatically. Windows uses a custom Thesycon USB driver, while macOS needs no driver.
Its ten-band parametric EQ has independent left and right settings for frequency, gain and bandwidth and works on PCM up to 192 kHz / 32 bit. Bands, target curves and stored profiles are set in the TOPPING Tune software, and each output can carry its own PEQ configuration. From a smartphone the TOPPING Home app switches inputs and sets EQ and volume. Touch-sensitive keys accept tap, long press and double tap, and the display has three brightness levels. Power comes from a 5 V DC adapter through a dedicated USB-C socket. In the box are an infrared remote, USB A-to-C and C-to-C cables and a Bluetooth antenna.
Pairing
Balanced TRS jacks give 5.3 or 11.3 V (23.2 dBu), and the RCA pair gives 2.6 or 5.6 V at 0 dBFS. Output impedance is 100 ohms balanced and 50 ohms single-ended, and both AC-coupled outputs work independently or at the same time. In preamp mode the E50 II connects directly to power amplifiers or active studio monitors.
Alternatives
The TOPPING E70 Velvet is a desktop DAC that uses the AKM AK4499EX chip.