The Pro-Ject DAC Box RS Final Edition is the last production run of the DAC Box RS, a D/A converter for digital stereo sources with a switchable tube or solid-state output. Pro-Ject made exclusive modifications for this run and offered it with limited availability, at an MSRP of EUR 1,199 including VAT. The full aluminium case comes in silver or black, and the unit is made in Europe.
Key specs that matter
Conversion uses two Texas Instruments PCM1792 chips in an 8x oversampling design, operated in differential mode. Nine digital inputs are provided - two coaxial S/PDIF, four optical Toslink, one AES/EBU, one USB B and one I2S on an RJ45 socket. Sampling rates are 32 to 192 kHz, with optical limited to 96 kHz, and DSD64 and DSD128 are accepted as DSD over PCM through USB. Frequency response is 20 Hz - 50 kHz (+0/-1 dB). Output voltage is max. 4 V on XLR and 2 V on RCA at 1 kHz. THD is 0.005% from the solid-state output and 0.25% from the tube output, and signal-to-noise ratio is 100 dB. Dimensions are 206 x 72 x 210 mm (W x H x D, with sockets), and weight is 1.89 kg without the power supply.
Engineering and use context
For the Final Edition, Pro-Ject equips the unit with two selected and matched Diamond ECC88 tubes with an SRP of EUR 199 each. Other components were also selected, and the internal wiring is improved. The analogue circuitry is fully balanced. Its output stage is switched between the ECC88 tube stage and a class A solid-state stage, and in class A mode the tube heaters switch off after about five minutes.
USB is asynchronous at up to 24-bit/192 kHz and uses XMOS technology. Two digital filters, steep and optimum phase, are selectable. The I2S input and a BNC clock output at 16.9344 MHz connect to the CD Box RS for sonic2data transfer. An outboard 20 V/3 A DC power supply is included, standby consumption is below 1 W, and an IR remote control comes with the unit.
Pairing
A preamplifier or integrated amplifier with balanced XLR or RCA line inputs is required. The matching transport is the CD Box RS, and the Power Box RS2 Sources is the linear power supply upgrade.
Alternatives
The Pro-Ject DAC Box RS2 is the later converter in the RS line, with dual-mono ESS9038Q2M chips and a switchable tube output.