Hifiverse

DACs - Pro-Ject DAC Box E

Beschreibung, Bilder, technische Daten und Spezifikationen

Pro-Ject DAC Box E
Bildquelle - (c) Pro-Ject

The DAC Box E is the entry-level D/A converter in the E range of Pro-Ject Audio Systems, with an MSRP of EUR 99 including VAT. It converts the signal from an optical or coaxial digital output into an analogue line signal. Pro-Ject names CD players, Blu-ray and DVD players with CD playback and set-top boxes as typical sources, and the manual adds TV satellite and cable receivers and game consoles.

Key specs that matter

Conversion is 24-bit/192 kHz. Pro-Ject lists a Texas Instruments TLV320DAC23 and a Cirrus Logic CS4344 as the D/A converter chips. Digital inputs are 1 x coaxial S/PDIF (RCA) and 1 x optical TOSlink. Sampling rates are 44.1, 48 and 96 kHz on both inputs, and 192 kHz on the coaxial input only. Supported format is PCM (LPCM) in stereo only, with no support for multichannel formats such as Dolby AC-3 or DTS. Line-level output is one pair of gold-plated RCA sockets at 0.7 Vrms. Dimensions are 120 x 32 x 100 mm (W x H x D), or 106 mm deep with sockets, and the weight is 250 g without the power supply.

Engineering and use context

SMD circuitry, special low-noise components and internal metal shielding are used, together with precision D/A converter chips and a low-noise output stage. Pro-Ject describes the whole audio circuit as linear, with a low output impedance to avoid interference from cables or preamplifiers. An outboard 18 V/500 mA DC power supply for 220 - 240 V, 50 Hz is included. Power consumption is 200 mA DC in operation and below 1 W in standby.

The two inputs cannot be used at the same time. With two sources connected, the optical input has priority. Its small size allows installation close to the source, and the casing is black or white.

Pairing

The analogue output connects to any line input of an amplifier, such as AUX. A source must send stereo PCM over S/PDIF, not a multichannel bitstream. A source with only a Toslink output connects to the optical input.

Alternatives

The Pro-Ject DAC Box S2+ is a D/A converter of the Box Design range that adds a USB input.

Spezifikationen

  • Modellbezeichnung

    DAC Box E

  • Wandlungstyp

    N/A

  • Wandlerchip

    N/A

  • DSD-Kompatibilität

    k. A.

  • Parameter

    up to 24Bit/192kHz

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Verstärkung (dBu)

    N/A

  • Ausgangspegel (symmetrisch) (V)

    N/A

  • Ausgangspegel (unsymmetrisch) (V)

    0.7

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Analogausgänge

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (% at 22 kHz)

    N/A

  • Abmessungen (mm)

    120 x 32 x 100

  • Gewicht (kg)

    0.25

  • Offizieller Link