Hifiverse

Subwoofer - ELAC Varro RS500

Beschreibung, Bilder, technische Daten und Spezifikationen

ELAC Varro RS500
Bildquelle - (c) ELAC

The Varro RS500 is the smaller model of ELAC's Reference series within the Varro subwoofer family, sold as the RS500-SB in satin black. In the range it sits above the bass reflex Premium series and below the DS1000 and DS1200. ELAC introduced the RS500 in March 2023 at USD 1,299.98, or EUR 1,299 in Europe. The family was engineered under ELAC chief technology officer Joe Riggi, and ELAC takes the Varro name from a Latin term meaning durable and strong.

Key specs that matter

Speaker type is sealed, with one 254 mm sandwich aluminium woofer with a HEX surround. Frequency response is 18 Hz - 150 Hz (anechoic) and 15 Hz - 150 Hz (in room). Maximum output level is 108 dB SPL at 1 m (anechoic). The low-pass crossover is adjustable from 40 Hz to 150 Hz. Amplifier topology is BASH, rated 500 W RMS and 1000 W peak into 4 ohms. Standby power consumption is below 2.0 W. Inputs are RCA line level, speaker level and a 12 V trigger, and data connections are USB for firmware updates and Ethernet for third-party control. Height is 381 mm, width 360 mm and depth 387 mm, and net weight is 20.8 kg. Mains rating is 100-120 V or 220-240 V AC, 50/60 Hz, with a T6.3A fuse.

Engineering and use context

ELAC equips the Varro models with DSP and states that digital signal processing is used to optimise extension, output and control. Settings are made in the ELAC Sub Control 3.0 app for iOS and Android over Bluetooth Low Energy, and the subwoofer has built-in PHASE and DELAY functions. Factory defaults are 75% volume, a 70 Hz low-pass at 12 dB and the Music preset.

Its rear panel carries LINE IN LEFT and RIGHT/LFE RCA sockets, left and right speaker level inputs, the 12 V trigger, an Ethernet port for control, a SERVICE USB port, a volume control and a WIRELESS PAIR/RESET button. A built-in wireless receiver works with the ELAC AirX2 transmitter, and up to three subwoofers can be paired with one transmitter. With power mode set to 12 V in the app, an input of 5 - 12 V switches the amplifier on and 0 V switches it off. Firmware is loaded from a FAT32 USB 2.0 flash drive and installs automatically at power-on. Grille, AC power cord and four spikes for carpeted floors are included. The RS500 is designed by ELAC and made in China.

Pairing

An AV receiver connects with a single RCA cable to the RIGHT/LFE input. A preamplifier or integrated amplifier without a subwoofer output connects through its variable pre-outs. An amplifier without pre-outs connects through the speaker level inputs, with the same speaker outputs also driving the main speakers.

Alternatives

The ELAC Varro RS700 is the larger Reference series model, with a 305 mm woofer, 700 W RMS and 111 dB maximum output.

Spezifikationen

  • Modellbezeichnung

    Varro RS500

  • Untere Grenzfrequenz +/- 3dB (Hz)

    15

  • Obere Grenzfrequenz +/- 3dB (Hz)

    150

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    1000

  • Größe (sm)

    38.1 × 36.0 × 38.7

  • Gewicht (kg)

    20.8

  • Offizieller Link