The Varro PS500-BK is the 381 mm model of ELAC's Premium series, the bass reflex tier of the Varro subwoofer family that ELAC introduced in March 2023. Launch prices were USD 999.98 in the United States and EUR 1,049 in Europe. Engineering of the Varro programme was directed by ELAC chief technology officer Joe Riggi. The BK suffix stands for the black vinyl cabinet finish.
Key specs that matter
Speaker type is bass reflex, with one 381 mm treated paper woofer. Frequency response is 20 Hz - 150 Hz (anechoic) and 16 Hz - 150 Hz (in room), measured as LFE at 90 dB/1 m. Maximum output level is 115 dB SPL at 1 m (anechoic). The low-pass crossover is adjustable from 40 Hz to 150 Hz. Amplifier topology is BASH, rated 500 W RMS and 1000 W peak into 4 ohms. Standby power consumption is below 0.5 W. Inputs are RCA line level, and the data connection is USB for firmware updates. Height is 480 mm, width 460 mm and depth 460 mm, and net weight is 25.9 kg. Mains rating is 100-120 V or 220-240 V AC, 50/60 Hz, with a T2.5A fuse.
Engineering and use context
ELAC equips the Varro models with DSP and states that digital signal processing is used to optimise extension, output and control. Setup is done in the ELAC Sub Control 3.0 app for iOS and Android, which connects over Bluetooth Low Energy and supports the setup of several subwoofers. PHASE and DELAY functions are built into the subwoofer. Factory defaults are 75% volume, a 70 Hz low-pass at 12 dB and the Music preset.
On the rear panel sit a volume control, LEFT and RIGHT/LFE RCA line inputs, a SERVICE USB port, a RESET button and the power switch next to the AC receptacle. Firmware is loaded from a FAT32 USB 2.0 flash drive with a 512-byte sector size, and the update starts automatically at power-on. Holding RESET for 10 to 15 seconds restores the factory settings. A second fuse is stored in the holder beneath the mains socket. Included are a grille, an AC power cord and four optional spikes intended for carpeted floors. The PS500 is designed by ELAC and made in China.
Pairing
An AV receiver connects with a single RCA cable from its subwoofer output to the RIGHT/LFE input. A preamplifier or integrated amplifier without a subwoofer output connects through a stereo RCA pair from its variable pre-outs. A line-level subwoofer output or variable pre-outs are required, as the PS500 has no speaker level input.
Alternatives
The ELAC Varro PS350-BK is the smaller Premium series model, with a 305 mm paper woofer and 350 W RMS into 4 ohms.