Rear channel speakers fill the side and back positions of a surround layout and carry ambience, effects and placed objects rather than dialogue. In a 7.1 system there are four of them, two beside the seats and two behind. This subcategory covers monopole, dipole and bipole surrounds, while the front stage is handled by center channel speakers and the main front pairs.
Choose the radiation pattern first. Direct-radiating monopole speakers fire straight at the seats and are the usual pick for object-based formats such as Dolby Atmos, while dipole and bipole models spread energy sideways for a diffuse field in older 5.1 and 7.1 setups. Next, plan the mounting. Side surrounds normally sit at 90 to 110 degrees from the screen axis and back surrounds at 135 to 150 degrees, around 60 cm above ear height, so wall brackets or on-wall cabinets are common. Then match the voicing. A model from the same series as your center keeps pans from front to back consistent. Finally, check depth if the speakers go on a wall beside a walkway, where cabinets under 15 cm deep are easier to live with.
Sensitivity of 86 to 90 dB keeps the receiver channel levels close to the front speakers. Nominal impedance is usually 6 or 8 ohms. Low-frequency extension around 60 to 100 Hz is enough, since most receivers send everything below 80 Hz to the subwoofer. Woofer size of 4 to 6.5 inches is typical for this role.
Surrounds change most in flexibility as price rises. Below USD 300 per pair they are compact monopole boxes with keyhole mounts. Between USD 300 and 1,000, expect switchable dipole and monopole modes, dedicated brackets and voicing matched to a series. Above USD 1,000, surrounds share tweeters and woofers with the brand's front models.
Center channel speakers anchor the front, floorstanding loudspeakers and bookshelf speakers supply the left and right mains, and subwoofers take the bass. Our home theatre articles cover speaker angles for 5.1, 7.1 and Atmos layouts.