Hifiverse

Standlautsprecher - Avantgarde Acoustic ZERO iTRON

Beschreibung, Bilder, technische Daten und Spezifikationen

Avantgarde Acoustic ZERO iTRON
Bildquelle - (c) Avantgarde Acoustic

The ZERO iTRON is a fully active three-way horn loudspeaker from Avantgarde Acoustic, the German manufacturer of horn loudspeakers that started production of its first model in 1991. It belongs to the G3 generation and is the new edition of the ZERO series, following the ZERO 1 built from 2015 to 2022. Midrange and tweeter are driven by iTRON current amplifiers, and a Class D amplifier with a DSP crossover drives the bass section.

Key specs that matter

Frequency range is 18 Hz - 22 kHz, and sensitivity is above 107 dB (1 W/1 m). Crossover frequencies are 250 Hz and 2.8 kHz. The XM1 midrange driver is 127 mm (5 in.) in a 400 mm spherical horn, the XT2 tweeter driver is 25 mm (1 in.) in a 130 mm spherical horn, and both horns have a 180 degree aperture angle. Bass comes from one 300 mm (12 in.) driver with a 3 in. voice coil and a handmade sieved paper diaphragm. Amplification is 2 x 10 W iTRON plus 1 x 400 W RMS for the bass module. The input is one XLR (10 kOhm). Dimensions are 490 x 1090 x 400 mm (W x H x D), and weight is 40.5 kg. Avantgarde gives the recommended room size as more than 16 m2.

Engineering and use context

According to Avantgarde, the patented iTRON voltage/current converter controls the acceleration of the diaphragm directly. Its circuit is fully balanced, operates in Class A/AB and has zero feedback, and the mid-high section uses a purely analogue active crossover. The XM1 is an EvolutionAA driver with an 18 ohm Omega voice coil, optimised for large, linear excursion, and its horn is 190 mm long with a 75 mm throat. For the XT2 Avantgarde uses an annular diaphragm with duplex suspension.

In the bass module the 300 mm driver has a double spider and works in a bass reflex configuration behind a removable fabric cover. Its DSP crossover removes all passive filter elements from the bass signal path. Subwoofer volume is set with two buttons on the rear display, a BASS-BOOST control lifts the range below 45 Hz, and an LPF-RANGE slider sets the upper crossover frequency of the subwoofer. Further settings can be programmed with software for Windows and macOS over USB.

Each speaker has a 12 VDC trigger input and an XLR daisy chain output, and it switches on with the signal and goes to standby after 20 minutes. Adjustable rear spikes of CNC-milled solid material on die-cast aluminium dampers set the tilt. The soft-touch cabinet is available in black or white.

Pairing

A preamplifier or source with balanced XLR outputs is required. The daisy chain output allows an additional external subwoofer.

Alternatives

The UNO SD is another Avantgarde Acoustic horn loudspeaker with a 500 mm spherical midrange horn, offered in semi-active and iTRON versions.

Spezifikationen

  • Modellbezeichnung

    ZERO iTRON

  • Untere Grenzfrequenz +/- 3dB (Hz)

    18

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    107

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    10+ 10 + 400

  • Größe (sm)

    49.0 × 109.0 × 40.0

  • Gewicht (kg)

    40.5

  • Offizieller Link