Hifiverse

Standlautsprecher - Avantgarde Acoustic UNO SD

Beschreibung, Bilder, technische Daten und Spezifikationen

Avantgarde Acoustic UNO SD
Bildquelle - (c) Avantgarde Acoustic

The UNO SD is the compact horn loudspeaker of the Avantgarde Acoustic G3 series and a scaled-down version of the DUO. Avantgarde builds it in two versions. The semi-active version has horn sections for an external amplifier and a powered bass module, and the iTRON version has the amplifiers built into the speaker.

Key specs that matter

This is a three-way horn system with an active subwoofer. Satellite frequency range is 290 Hz - 22 kHz, subwoofer range is 18 - 350 Hz, and crossover frequencies are 290 Hz and 2.8 kHz. Sensitivity is above 107 dB (1 W/1 m) at a nominal impedance of 18 ohms. Recommended amplifier power is above 10 W, and power handling is 50 W. A 500 mm midrange horn and a 160 mm tweeter horn carry a 127 mm midrange driver and a 25 mm tweeter. Low frequencies come from one 250 mm XB10 bass driver driven by a 500 W RMS amplifier. Each speaker measures 500 x 1355 x 615 mm (W x H x D) and weighs 81.5 kg.

Engineering and use context

Both horns are spherical horns with a 180 degree aperture angle, and all drivers sit on one axis, so their acoustic centres lie in the same plane. The Evolution XM1 midrange driver is optimised for long, linear excursion. Its Soft Mesh Compound cone is a rigid mesh shell whose openings are sealed with a synthetic elastomer coating, and Avantgarde states that this coating reduces partial resonances. The midrange and tweeter drivers use Omega voice coils. For the UNO SD Avantgarde redesigned the XT2 tweeter, which has a lighter annular diaphragm with a duplex guide. The passive crossover uses the SphericLowCut filter, AirGate and the PolarizationPlus circuit with NatureCap capacitors made from rolled aluminium foil and an oil-impregnated cellulose dielectric.

In the bass-reflex subwoofer module the XB10 has a 153 mm voice coil, up from 100 mm, and 1.15 T flux density over a 480 mm voice coil length. Its diaphragm is a long-fibre paper and carbon fibre composite with an NBR surround on a die-cast aluminium SingleFrame chassis. The G3-500 amplifier module has a DSP with a digital crossover and an 8-band equaliser, and its line tap is balanced and transformer-coupled. In the iTRON version a patented zero-feedback current amplifier rated at 2 x 100 W is added.

Pairing

The semi-active version requires an external stereo amplifier for the horn sections. Its bass module connects through speaker-level terminals or an XLR line input. A 12 V switching input allows remote power-on.

Alternatives

The DUO SD is the larger Avantgarde G3 horn loudspeaker on which the UNO SD is based.

Spezifikationen

  • Modellbezeichnung

    UNO SD

  • Untere Grenzfrequenz +/- 3dB (Hz)

    290

  • Obere Grenzfrequenz +/- 3dB (Hz)

    22 000

  • Empfindlichkeit (dB at 1 W/1m)

    107

  • Impedanz (Ohms)

    18

  • Anforderungen an den Endverstärker (W)

    10 - 50

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    100 + 100 + 500

  • Größe (sm)

    50.0 × 135.5 × 61.5

  • Gewicht (kg)

    81.5

  • Offizieller Link