Hifiverse

Standlautsprecher - Fyne Audio VINTAGE CLASSIC GOLD VIII SP

Beschreibung, Bilder, technische Daten und Spezifikationen

Fyne Audio VINTAGE CLASSIC GOLD VIII SP
Bildquelle - (c) Fyne Audio

The Vintage Classic Gold VIII SP is the smallest of four floorstanding loudspeakers in the Vintage Classic Gold SP Series from Fyne Audio, alongside the X, XII and XV SP. Fyne states that the series carries technology first developed by Dr Paul Mills for the Vintage Series into the Classic cabinet format. Cabinets are made in Fyne's own facility in Scotland, and the UK price is GBP 7,499.99 per pair in walnut.

Key specs that matter

This is a two-way design with a twin cavity reflex enclosure, a port facing the floor and a BassTrax Tractrix diffuser. Its drive unit complement is one 200 mm IsoFlare point source driver with a multi-fibre bass/midrange cone and FyneFlute surround, plus a 25 mm magnesium dome compression tweeter with a ferrite magnet system. Crossover frequency is 1.8 kHz. Sensitivity is 91 dB (2.83 V/1 m), and nominal impedance is 8 ohms. Frequency response is 30 Hz - 34 kHz (-6 dB, typical in room). Recommended amplifier power is 30 - 200 W RMS, with continuous power handling of 100 W RMS. Dimensions are 873 x 380 x 300 mm (H x W x D, including plinth, terminals and grille), and net weight is 26.3 kg each.

Engineering and use context

In the IsoFlare driver the bass/midrange cone shares a common centre with the HF unit, and both are built on a custom tooled cast aluminium chassis. Its LF motor uses a ferrite magnet and a rectangular copper voice coil on an aluminium former, with a copper shorting ring on the pole piece. Its high density birch ply cabinet is walnut veneered with gold anodised metalwork, and the drive unit is coupled to the internal bracing panels through damping material.

According to Fyne, the twin cavity reflex loading broadens the tuning frequency to reduce cone excursion and blocks standing waves from the main internal port. Below the vent, the patented Tractrix profile diffuser converts the output into a 360-degree wavefront.

Crossover slopes are 2nd order low pass and 1st order high pass. Laminated iron core LF inductors, precision resistors and polypropylene capacitors are hard wired on fibre board panels and cryogenically treated in house. An autotransformer with silicon steel laminations matches the HF compression driver to the amplifier. Wiring is Neotech PC-OCC, and the bi-wire terminals are ETI gold plated copper parts. Two front panel controls adjust the 1.8 - 34 kHz and 2.5 - 5 kHz bands, each by ±3 dB.

Pairing

Two sets of terminals allow single-wire, bi-wire or bi-amp connection, with the link cables removed for the last two. A grounding terminal on the drive unit chassis connects to the amplifier earth.

Alternatives

The Vintage Classic Gold X SP is the next model up, with a 250 mm IsoFlare driver, a 75 mm titanium alloy dome compression tweeter and 94 dB sensitivity.

Spezifikationen

  • Modellbezeichnung

    VINTAGE CLASSIC GOLD VIII SP

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    34 000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    30 - 200

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    87.3 x 38.0 x 30.0

  • Gewicht (kg)

    26.3

  • Offizieller Link