Hifiverse

Standlautsprecher - Focal SOPRA N°2

Beschreibung, Bilder, technische Daten und Spezifikationen

Focal SOPRA N°2
Bildquelle - (c) Focal

The Sopra N°2 is a three-way bass-reflex floorstanding loudspeaker from Focal. It was presented at High End Munich in 2015 as the floorstanding model of the new Sopra line, which at that point comprised only the N°1 standmount and this model. In the US a pair was priced at USD 13,999, with a five-year warranty on parts and workmanship. Its cabinets are made in France by Focal's own cabinetmakers, and the drivers are developed and manufactured by Focal in France.

Key specs that matter

Driver complement is a 27 mm IHL Beryllium inverted dome tweeter, a 165 mm W midrange with TMD suspension and NIC motor, and two 180 mm W woofers with NIC magnetic circuit. Crossover frequencies are 250 Hz and 2.2 kHz. Frequency response is 34 Hz - 40 kHz (±3 dB), and the low frequency point is 28 Hz (-6 dB). Sensitivity is 91 dB (2.83 V/1 m). Nominal impedance is 8 ohms (min. 3.1 ohms). Recommended amplifier power is 40 - 300 W. Dimensions are 1190 x 358 x 540 mm (H x W x D), and net weight is 55 kg. Focal specifies rooms up to 30 m2 and larger rooms up to 70 m2.

Engineering and use context

All three cone drivers use W cones, with two sheets of glass fibre on either side of a central foam body. For the tweeter Focal developed IHL (Infinite Horn Loading), which loads the Beryllium dome while the maximum cabinet volume is kept for the bass, and the rear wave is progressively absorbed. NIC motors have a Faraday ring that keeps the magnetic field stable. On the midrange, TMD adds toroidal weights to stabilise the suspension between 1 kHz and 2 kHz.

Panels are MDF to the Gamma Structure, optimised by vibration mapping of the walls. Between the top and bottom cabinets is an intermediate piece injected with polyurethane, and it allows both cabinets to be tilted for Focus Time convergence at the listening point. A 19 mm tempered glass base carries stainless steel decoupling spikes, designed for Sopra and manufactured by watchmaking specialists, with the counter spikes already mounted. A grille with a lattice pattern protects the tweeter, and the same pattern is repeated on the back plate of the midrange. Magnetic front grilles are supplied. Current finishes are Carrara White, Black Lacquer, Electric Orange, Light Oak and Macassar.

Pairing

An amplifier stable into low impedances is required. The connectors accept stripped cables up to 4 mm, fork terminals or banana plugs.

Alternatives

The Sopra N°3 is the larger Sopra floorstanding loudspeaker, with two 210 mm W woofers and a 40 - 400 W amplifier rating.

Spezifikationen

  • Modellbezeichnung

    SOPRA N°2

  • Untere Grenzfrequenz +/- 3dB (Hz)

    34

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    40 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    119.0 × 35.8 × 54.0

  • Gewicht (kg)

    55

  • Offizieller Link

Weitere Komponenten