Hifiverse

Standlautsprecher - Focal KANTA N°3

Beschreibung, Bilder, technische Daten und Spezifikationen

Focal KANTA N°3
Bildquelle - (c) Focal

The Kanta N°3 is a three-way bass-reflex floorstanding loudspeaker from Focal and the reference product of the Kanta line, which also includes the Kanta N°1, Kanta N°2 and Kanta Center. Kanta was the first Focal line to combine pure beryllium tweeters with Flax cones, after three years of research. Its drive units are developed and manufactured in France. Focal specifies the N°3 for rooms of 40 to 80 m2.

Key specs that matter

Two 8-inch (21 cm) Flax bass drivers with NIC motor, a 6.5-inch (16.5 cm) Flax midrange with TMD suspension and NIC motor and a 27 mm IAL3 pure beryllium inverted-dome tweeter make up the driver complement. Crossover frequencies are 250 Hz and 2,500 Hz. Frequency response is 33 Hz - 40 kHz (±3 dB), and the low-frequency point is 26 Hz (-6 dB). Sensitivity is 91 dB (2.83 V/1 m). Nominal impedance is 8 ohms (min. 3 ohms), with recommended amplifier power of 40 - 400 W. Each speaker measures 1280 x 386 x 520 mm (H x W x D) and weighs 46 kg with the grille.

Engineering and use context

Focal describes the IAL3 as its latest-generation IAL tweeter, and its pure beryllium inverted dome covers more than five octaves, from 1,000 Hz to 40,000 Hz. Both the midrange and the bass drivers use the patented Flax sandwich cone, with French flax fibre placed between two thin sheets of fibreglass. On the midrange, TMD (Tuned Mass Damper) suspension adds finely positioned toroidal weights against the erratic behaviour of the suspension between 1 kHz and 2 kHz. Each NIC motor has a Faraday ring whose dimensions, material and positioning are optimised to keep the magnetic field stable.

Its front panel is moulded from a single block of High Density Polymer (HDP). According to Focal, this material is 70% denser than MDF, 15% more rigid and offers 25% more damping. Behind it sit a one-piece moulded multi-ply wood rear shell, a Zamak base and a glass top plate. With Focus Time geometry, all drivers are at the same distance from the listener's ear. Bass loading uses the PowerFlow multi-port system with a front port and a rear port. Four spikes are supplied, four counter spikes come already mounted, and the grille is magnetic. Finishes combine a matt front panel with a Black, White or Walnut high-gloss cabinet.

Pairing

An amplifier stable into 3 ohms is required. Amplifier power should stay within Focal's recommended range. For home cinema, the matching centre speaker is the Kanta Center.

Alternatives

The Kanta N°2 is the smaller floorstanding loudspeaker of the Kanta line.

Spezifikationen

  • Modellbezeichnung

    KANTA N°3

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    40 - 400

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    52.0 × 128.0 × 38.6

  • Gewicht (kg)

    46

  • Offizieller Link

Weitere Komponenten