Hifiverse

Standlautsprecher - Wilson Audio Sasha V

Beschreibung, Bilder, technische Daten und Spezifikationen

Wilson Audio Sasha V
Bildquelle - (c) Wilson Audio

The Sasha V is a floorstanding loudspeaker from Wilson Audio Specialties of Provo, Utah, and the fifth generation of the Sasha line. Wilson describes it as combining the essence of its predecessors with the most effective elements developed for its larger models.

Key specs that matter

Driver complement is two 203 mm woofers, one 178 mm midrange and one 25 mm tweeter. The woofer enclosure is rear-ported and the midrange/tweeter enclosure is rear-vented. Sensitivity is 88 dB (1 W/1 m, 1 kHz). Impedance is 4 ohms nominal, 2.36 ohms minimum at 82 Hz. Minimum amplifier power is 25 W per channel. Frequency response is 20 Hz - 32 kHz (±3 dB, Room Average Response). Each speaker measures 1,145 mm high without spikes, 368 mm wide and 608 mm deep and weighs 111.13 kg uncrated.

Engineering and use context

Wilson's CSC (Convergent Synergy Carbon) tweeter was introduced in the Alexx V. Its carbon fibre rear-wave chamber is 3D-printed in-house. The midrange is a 178 mm AlNiCo QuadraMag driver.

Its crossover is hand-made at Wilson Audio with point-to-point connections instead of printed circuit boards. An all-new copper version of the AudioCapX-WA capacitor makes its debut in the Sasha V.

The upper module rests on the woofer cabinet with V-Material nested at the interface between them for vibration control and isolation. A two-position front spike track on the upper module offers more time-alignment positions than the Sasha DAW had, and a staircase alignment block is used to set them. Behind the woofer top plate there is a flush-mounted bubble level for levelling. External umbilical cables are terminated with the Wilson Audio spade.

A complete set of Wilson Audio Acoustic Diodes is included. Made of austenitic stainless steel and V-Material, they were developed by the WASAE (Wilson Audio Special Applications Engineering) division. Connections are made at Wilson's multi-connector binding posts. Cabinets are finished in WilsonGloss paint, with three tiers of colour options.

Pairing

An amplifier stable into loads well below 4 ohms is required. Speaker cables can terminate in spades or banana plugs.

Alternatives

The Sabrina V is another floorstanding loudspeaker in Wilson Audio's current range.

Spezifikationen

  • Modellbezeichnung

    Sasha V

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    32000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    25

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    114.48 x 36.83 x 60.78

  • Gewicht (kg)

    111.13

  • Offizieller Link

Weitere Komponenten