Hifiverse

Standlautsprecher - Manger S1

Beschreibung, Bilder, technische Daten und Spezifikationen

Manger S1
Bildquelle - (c) Manger

The S1 is an active analogue two-way floorstanding system from Manger Audio of Mellrichstadt, Germany. It pairs the patented Manger Sound Transducer with a bass unit and carries its own amplifiers and control electronics. Standard finishes are matt or satin colours, real wood veneers and UltraHigh Gloss, and Manger also builds cabinets in RAL and other colours on request.

Key specs that matter

Its enclosure is sealed. High and mid frequencies come from the Manger Sound Transducer W06, with a bandwidth of 330 Hz - 45 kHz and a rise time of 13 µs. Bass is a 200 mm (8 in.) glass fibre-polyester sandwich unit with a 38 mm voice coil. Crossover frequency is 330 Hz, and frequency range is 30 Hz - 45 kHz. Maximum power output is 250 W into 8 ohms class AB for LF and 180 W into 8 ohms class AB for HF, and HF power bandwidth is 250 kHz (-3 dB). Maximum SPL is 110 dB peak. Input is XLR-3 balanced, with an input impedance of 10 kohms and a switchable input sensitivity of 6 dBu (1.55 V) or 0 dBu. Dimensions are 1139 x 270 x 214 mm, and weight is 48 kg.

Engineering and use context

Bending waves propagate from the centre across the flexible membrane of the Manger transducer, and Manger states that a single membrane reproduces a very wide frequency range in this way. Inside the cabinet an ultra-stable frame suppresses wall resonances and internal standing waves. Both drivers are set into a 38 mm thick front baffle, each in its own sealed compartment, and generously rounded edges reduce diffraction.

Drivers, analogue amplifiers and control electronics are all attached with durable threaded screws. An aluminium housing for the electronics joins the cabinet without a gap. Cables enter through a recess at the bottom, and the base sits on Manger cf1 cone feet. On the amplifier panel there is an 11-position input trim (-2.5 dB to +2.5 dB), an AV high-pass filter (80 Hz, 12 dB), an LF -6 dB switch and a 10 kHz shelving trim from -2 dB to +2 dB. Power and limiter LEDs show the operating state.

Pairing

A preamplifier or source with a balanced XLR output and volume control is required. No external power amplifier is needed. The AV filter allows use with a subwoofer in a home cinema system.

Alternatives

The P2 is the passive Manger floorstanding speaker, with the W06 transducer, a sealed enclosure with two passive radiators and an 8 ohm impedance.

Spezifikationen

  • Modellbezeichnung

    S1

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    250

  • Größe (sm)

    113.9 x 27.0 x 21.4

  • Gewicht (kg)

    48

  • Offizieller Link

Weitere Komponenten