The Reserve R700 is the largest floorstanding loudspeaker in Polk Audio's Reserve series, a range that takes technologies from Polk's Legend series. It is a three-way design, certified for Hi-Res Audio and IMAX Enhanced, and is sold individually at USD 1,199 per speaker in Black or Walnut.
Key specs that matter
Transducers are a 1 in (25.4 mm) Pinnacle Ring Radiator tweeter, a 6.5 in (165 mm) Turbine Cone midrange and two 8 in (203 mm) polypropylene woofers. Crossover frequencies are 350 Hz and 2.7 kHz. Overall frequency response is 30 Hz - 50 kHz, and 38 Hz - 38 kHz within -3 dB limits. Sensitivity is 88 dB (2.83 V/1 m). Amplifier output compatibility is 8, 6 and 4 ohms, with a minimum impedance of 3.6 ohms, and recommended amplifier power is 50 - 300 W. Dimensions including the feet are 320.7 x 1143.8 x 428.3 mm (W x H x D), and weight is 35.9 kg.
Engineering and use context
According to Polk, the pointed shape of the Pinnacle Ring Radiator guides high-frequency dispersion, and the tweeter has a waveguide and a critically damped rear chamber. Its Turbine Cone geometry increases cone rigidity without increasing mass. The midrange has a sealed enclosure with Cabinet Resonance Control (CRC), while the woofers are loaded by a floor-firing Power Port with X-Port. Power Port 2.0 combines the Power Port airflow design with X-Port closed-pipe absorbers, eigentone filters tuned to cabinet and port resonances.
Cabinet bracing is point to point and was designed with a Laser Doppler Vibrometer (LDV), with individual enclosures for the mid- and low-frequency transducers. Rounded exterior corners reduce diffraction. Spikes and pads come with the speaker, and it has no keyhole slots for wall mounting. Dual pairs of nickel-plated five-way binding posts are on the rear panel. The separately sold R900 height module is designed to sit on top of the R700 for Dolby Atmos, DTS:X and Auro-3D height channels.
Pairing
An amplifier stable into loads down to 4 ohms is required. Dual terminals allow bi-wiring or passive bi-amping. The matching height module is the Reserve R900.
Alternatives
Polk's Reserve R600 is a smaller floorstanding model in the range, using two 6.5 in Turbine Cone drivers and a 4.0 ohm minimum impedance.