Hifiverse

Standlautsprecher - Polk Audio Legend L800 - Right

Beschreibung, Bilder, technische Daten und Spezifikationen

Polk Audio Legend L800 - Right
Bildquelle - (c) Polk Audio

The Legend L800 is the flagship floorstanding loudspeaker of the Polk Audio Legend series and the only Legend model with SDA-PRO technology. Each speaker is sold individually in left and right versions, and the L800 Right is the right-hand unit. It was launched in November 2019 at USD 2,999 per speaker and now appears among Polk's archived products. Finishes are Brown Walnut and Black Ash.

Key specs that matter

Each L800 carries two 25 mm Pinnacle Ring Radiator tweeters, two 133 mm Turbine Cone midrange drivers and two 254 mm mid/woofers. Its two 3-way Orth crossovers are set at 370 Hz and 2.8 kHz. Frequency response is 32 Hz - 38 kHz (-3 dB), and total frequency response is 24 Hz - 50 kHz. Sensitivity is 87 dB (2.83 V/1 m), with an impedance of 4 ohms (min. 2.8 ohms). Polk recommends 25 - 300 W per channel and gives 100 W as its recommended amplifier power. The woofer section is Power Port vented, and the midrange sits in a sealed enclosure. Dimensions are 1234.5 x 455.6 x 441.4 mm (H x W x D), and weight is 53.5 kg, or 68.5 kg in the carton.

Engineering and use context

SDA stands for Stereo Dimensional Array. Polk explains that sound from each channel of conventional speakers also reaches the opposite ear, an effect Polk calls interaural crosstalk (IAC). SDA-PRO uses additional drivers to radiate an acoustically inverted dimensional signal that cancels IAC. A dimensional HS (head shadow) crossover matches this cancellation signal to IAC, and angled baffles point the main stereo arrays at the primary listening area. Both speakers have an SDA Pro interconnect socket on the input plate and are linked by the supplied interconnect cable.

Polk developed the Pinnacle Ring Radiator tweeter in-house. Its Turbine Cone combines a proprietary foam core with moulded turbine geometry to increase stiffness and damping without adding mass. Polk states that its Power Port produces less port noise than a conventional port. Cabinets, braces and internal enclosures are engineered to minimise internal standing waves and resonances. Supplied with each speaker are a removable magnetic grille, four rubber carpet-spike covers and a cleaning cloth.

Pairing

An amplifier or AV receiver rated for 4 ohm loads is required. The two sets of terminals allow bi-amping with amplifiers of identical gain. On an AV receiver Polk specifies the Large speaker setting. The matching height module is the L900, which sits on top of the tower for Dolby Atmos and DTS:X height channels.

Alternatives

The Legend L600 is the smaller floorstanding speaker of the series, without SDA, with one 133 mm midrange driver and two 178 mm woofers.

Spezifikationen