The Pulsar S 130 is a three-way floorstanding loudspeaker from T+A elektroakustik of Herford, Germany, whose name stands for Theorie und Anwendung, theory and application. According to T+A, the Pulsar series is the third generation of its loudspeakers, and it brings the Symmetric Directivity layout of the company's reference speakers to a lower price class. Introduced at the end of 2024 and made in Germany, it was priced at about USD 7,500 per pair in the USA.
Key specs that matter
Design is three-way bass reflex. Drive units are two 150 mm bass units, two 115 mm StarStabilizer midrange drivers and a 25 mm magnesium dome tweeter, with crossover frequencies of 225 Hz and 2.2 kHz. Frequency range is 32 Hz - 45 kHz, sensitivity is 86 dB and impedance is 4 ohms. Nominal power rating is 150 W, music power rating 180 W. Dimensions are 1000 x 270 x 370 mm (H x W x D) including base and spikes, and weight is 22.5 kg.
Engineering and use context
In the Symmetric Directivity system the AudiophileLinearity tweeter is combined with the two midrange drivers. T+A states that this arrangement makes the sound field strongest at the centre of the listening area and reduces reflections from ceiling and floor.
All four cones are StarStabilizer diaphragms. Their raw material is refined with silicon powder and carries a central star-shaped reinforcement against modes and self-resonances, so the membranes move as pistons. Each midrange driver has an extra-strong magnet and covers the entire vocal range. The bass units combine strong magnets, large voice coils and a long-throw design, and their resonance frequencies are matched to the reflex system so that the rearward energy of the drivers adds to bass pressure.
Its newly developed tweeter uses a magnesium dome with a coating against the resonances typical of metal domes at high frequencies, and it reaches 40 kHz. A custom Audiophile Diffuser spreads its output evenly. In T+A's OrganicBaffle design the front baffle is entirely screw-free and internally anchored. The curved enclosure takes its form from Art Deco and is finished in multi-layer rubbed lacquer in black or white.
Pairing
An amplifier stable into 4 ohms is required. The matching integrated amplifiers come from T+A's R-Series, for example the PA 2500 R.
Alternatives
The Criterion S 230 is a T+A transmission line floorstanding speaker from the Criterion S series.