The Platinum 300 3G is the flagship of Monitor Audio's third-generation Platinum Series, a three-way floorstanding speaker launched in the company's 50th anniversary year. Its MPD III tweeter was developed for the Concept 50 and the Hyphn. Launch prices were GBP 11,500, EUR 14,000 or USD 15,500 per pair, and the current US price is USD 22,000. Finishes are Piano Ebony, Piano Black and Pure Satin White.
Key specs that matter
System format is three-way, rear-ported, with a Dual HiVe II port system tuned to 32 Hz. Two 203 mm RDT III bass drivers, a 102 mm RDT III mid-range driver and an MPD III tweeter form the driver complement, crossed over at 650 Hz (LF/MF) and 3 kHz (MF/HF). Frequency response is 25 Hz - 60 kHz (-6 dB, free field) and 17 Hz - 60 kHz (-6 dB, in room). Sensitivity is 88 dB (2.83 Vrms/1 m, free field). Nominal impedance is 4 ohms (min. 4.0 ohms at 3.75 kHz). Continuous power handling is 400 W (4 ohms, pink noise, 6 dB crest factor), and recommended amplifier power is 200 - 800 W into 4 ohms. Dimensions including outrigger feet and spikes are 1131 x 430 x 525 mm (H x W x D), weight is 53.6 kg, and the warranty runs five years.
Engineering and use context
Laminated layers of MDF form a curved and braced cabinet, 18 to 21 mm thick at the rear, with a 36 mm baffle machined to a curved front profile. Etched inlays and 16 layers of lacquer finish the enclosure. Instead of a plinth, outrigger foot assemblies form the platform under the speaker. Every driver sits in an individually cast aluminium frame, with two layers of isolation between the driver chassis and the cabinet.
According to Monitor Audio, the Micro Pleated Diaphragm of the MPD III extends the tweeter passband beyond 60 kHz, against more than 40 kHz for a typical AMT. Its square radiating area gives equal directivity in the horizontal and vertical planes, and the waveguide is shaped for controlled directivity and radiation impedance matching.
RDT III cones are a sandwich of a C-CAM front skin and a honeycomb Nomex core. For the 3G generation the rear layer was changed to two uniform carbon fibre skins and the rubber surround was optimised, both to reduce cone breakup, while a revised cone edge treatment extends the passband of the drivers.
Pairing
An amplifier stable into 4 ohms is required. The matching centre channel is the Platinum C250 3G.
Alternatives
The Platinum 200 3G is the three-way floorstanding model below it in the series, with two 152 mm RDT III bass drivers and a 102 mm RDT III mid-range driver.