The Anthra W15 is the largest subwoofer in the Anthra series from Monitor Audio, above the W10 and W12. It is an active sealed-box design, and Monitor Audio positions it for large home cinema systems. The series was introduced in 2023 at launch prices for the W15 of GBP 2,500, EUR 3,200 and USD 3,500, and its current US list price is USD 4,299.
Key specs that matter
Drive unit complement is one 381 mm high linear-excursion triple suspension driver with 50 mm peak-to-peak excursion. The high-efficiency Class-D amplifier is rated at 2,500 W instantaneous and 1,400 W continuous short-term, on 240 V and on 120 V mains alike. Lower frequency limit is 16 Hz (-6 dB), and with the low-pass filter off the upper limit is 400 Hz (-6 dB). External dimensions are 439 x 439 x 439 mm (H x W x D, without feet), weight is 35.41 kg and power consumption is 550 W. Finishes are High Gloss Black and Satin White, with a 5-year warranty.
Engineering and use context
Monitor Audio defines the instantaneous figure as maximum RMS output for an instantaneous signal and the continuous short-term figure as a sine wave held for 10 seconds. Its amplifier and power supply were designed in tandem for efficiency and lower distortion. The cone is C-CAM, a ceramic-coated aluminium-magnesium material with a higher resistance to bending stress, and the Anthra range is the first Monitor Audio subwoofer line with Rigid Surface Technology II on the cone, a treatment that increases cone rigidity. A massive motor assembly drives it.
Cabinet walls are braced 25 mm MDF with a 36 mm front baffle, 19 mm internal walls and acoustically optimised bracing, and the cloth grille attaches magnetically. Signal processing uses a 28-bit, 50 MIPS DSP after an autoranging input stage that accepts up to 10 Vrms and keeps noise low on small signals. The low-pass filter covers 20-200 Hz with roll-off from -3 to -48 dB per octave, and phase is adjustable over 0-360 degrees at the crossover. Three predefined and three custom EQ curves are stored, each with 8 bands of peaking, high shelf, low shelf and high-pass filters. Basic setup and EQ preset selection are on a full-colour LCD with a rotary dial on the back panel, and DSP configuration and multi-sub setup are in the MaestroUnite app.
Pairing
A preamplifier, AV processor or receiver with a line-level subwoofer or LFE output is required. Inputs are stereo RCA, with mono or LFE on the connector marked LFE, and balanced XLR for mono or LFE. The unbuffered RCA and XLR outputs allow up to four Anthra subwoofers in one system, and MaestroUnite applies the same settings to all of them.
Alternatives
The Monitor Audio Anthra W12 is the mid-sized model of the series, with a 305 mm driver and a 1,700 W instantaneous Class-D amplifier.