Hifiverse

Standlautsprecher - Opera Loudspeakers Opera Quinta

Beschreibung, Bilder, technische Daten und Spezifikationen

Opera Loudspeakers Opera Quinta
Bildquelle - (c) Opera Loudspeakers

The Quinta is the larger floorstanding loudspeaker of the Classica line from Opera Loudspeakers of Dosson di Casier near Treviso, Italy. In its V2 form the Classica line has two stand-mounts, two floorstanding speakers and a centre channel. Opera describes the current Quinta as an evolution of the configuration of the previous model, and it is offered in Rosewood, Cement Gray and Oak.

Key specs that matter

Type is a three-way, rear bass-reflex floorstanding speaker. Drive units are a 26 mm soft dome tweeter with a double ferrite magnet and aluminium front plate, a 150 mm coated fibreglass midrange cone and two 180 mm black anodised aluminium bass cones, all with ferrite magnets. Crossover frequencies are 250 Hz and 2.3 kHz. Sensitivity is 91 dB (2.83 V/1 m). Nominal impedance is 6 ohms, with a minimum of 4.3 ohms. Frequency response is 42 Hz - 21 kHz (-3 dB). Maximum power is 200 W without clipping, and recommended amplifier power is 25 - 150 W. The cabinet measures 237 x 1,100 x 440 mm (W x H x D), or 319 x 1,158 x 529 mm with the base, and net weight is 39 kg.

Engineering and use context

All drive units have a new design and were developed in collaboration with Scan-Speak. According to Opera, this work combines extension, sensitivity and very low distortion, and the aluminium membranes from the Danish manufacturer have a low-level high-frequency resonance.

Inside the crossover are Vishay anti-inductive resistors and Mundorf capacitors. Its layout was chosen to optimise the acoustic phases of the individual transducers, and Opera quotes contained phase rotation and good driveability even with amplifiers of limited power.

Countless tests went into the cabinet shape, with the aim of minimising midrange reflections. No internal walls are parallel to each other, and the ratio between the dimensions minimises standing waves. Opera measured the sound pressure emitted by each wall and reduced it to a level below the average ambient noise. Behind the drive units the front panel is machined on the inside to reduce reflections from the cabinet that can pass through the membranes. The reflex duct is dimensioned to avoid turbulence even at higher power.

Pairing

An amplifier stable into 4 ohms and within the recommended power range is required.

Alternatives

The Opera Seconda is the smaller floorstanding speaker of the Classica line, built as a 2.5-way design.

Spezifikationen

  • Modellbezeichnung

    Opera Quinta

  • Untere Grenzfrequenz +/- 3dB (Hz)

    30

  • Obere Grenzfrequenz +/- 3dB (Hz)

    30 000

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    140

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    110 × 24.5 × 43

  • Gewicht (kg)

    45

  • Offizieller Link