The Callas Diva is a three-way floorstanding loudspeaker in the Callas line of Opera Loudspeakers, based in Dosson di Casier near Treviso, Italy. This model replaces an earlier Callas Diva of the same name and has been completely redesigned. Opera positions its performance at the level of the Grand Callas, in a cabinet of much smaller volume intended for smaller rooms. Reworked in 2014, the Callas line consists of the Callas stand-mount, the Callas Diva and the Grand Callas, and a Callas Diva Edizione Speciale version is also offered.
Key specs that matter
System type is reflex-loaded. Front drivers are one 8-inch woofer, one 7-inch midrange and one tweeter. Crossover frequencies are about 200 Hz and 2000 Hz. Frequency response is 30 - 25,000 Hz. Sensitivity is 90 dB (2.83 V/1 m), and nominal impedance is 4 ohms (Z min above 3.2 ohms). Maximum power is 240 W without clipping. Dimensions are 370 x 1160 x 535 mm (W x H x D), and net weight is 65 kg.
Engineering and use context
Besides the front tweeter, the Callas Diva has tweeters on the rear of the cabinet that radiate backwards as a dipole.
Its 7-inch midrange has a re-cooked polypropylene cone with a phase plug at the centre, and the 8-inch woofer is a long-throw type. Every crossover section uses a 12 dB/octave slope, for the woofer, the midrange, the front tweeter and the rear tweeters alike.
Opera Loudspeakers supplies the Callas Diva in pairs. Finishes are lacquered mahogany or walnut.
Pairing
An amplifier stable into 4 ohms is required. Opera Loudspeakers shares its premises with Unison Research, and the matching electronics are Unison Research amplifiers, including tube models.
Alternatives
The Grand Callas is the larger floorstanding loudspeaker of the Callas line, with a significantly greater cabinet volume.