The OBERON 7 is a two-way floorstanding loudspeaker from DALI of Nørager, Denmark, and the larger of the two passive floorstanding models in the original OBERON line-up. DALI first showed the series at IFA 2018 in Berlin together with the OBERON 5 floorstanding speaker and the OBERON 1 and OBERON 3 stand-mount models. In October 2020 the three-way OBERON 9 was added above it. DALI describes the OBERON 7 as a speaker for deep bass and large rooms, and the company now lists the OBERON series among its discontinued products.
Key specs that matter
Design is two-way bass reflex with a crossover frequency of 2.3 kHz. Two 178 mm low/mid frequency drivers are combined with one 29 mm soft dome tweeter. Frequency range is 36 Hz - 26 kHz (±3 dB), sensitivity is 88.5 dB (2.83 V/1 m) and nominal impedance is 6 ohms. Maximum SPL is 110 dB at 1 m, and recommended amplifier power is 30 - 180 W. Bass reflex tuning frequency is 39.5 Hz. Dimensions are 1015 x 200 x 340 mm (H x W x D), and weight is 14.8 kg. Spikes, rubber feet and a manual are included. Finishes were light oak, dark walnut, white and black ash vinyl.
Engineering and use context
Both woofers are low loss units with a new wood fibre structured cone made from a blend of fine-grain paper pulp reinforced with wood fibres. According to DALI, this gives a stiff yet lightweight structure, and each cone is suspended by a low loss surround and spider. Inside the woofer magnet, the iron pole piece includes a patented SMC (Soft Magnetic Composite) disc. SMC reduces mechanical distortion caused by hysteresis and eddy currents and lowers third-order distortion in the magnet motor system.
Developed specifically for the OBERON series, the oversized 29 mm lightweight soft dome generates higher sound pressure with less excursion and keeps voice-coil motion to a minimum. Its front plate near the dome has a geometry similar to the OPTICON and RUBICON tweeters. Driver materials, driver geometry and crossover were all designed for a wide dispersion pattern.
High density, CNC machined MDF board dressed in vinyl forms the cabinet, with solid bracings across the inside. Bass ports sit at the rear of the cabinet, and an aluminium base is mounted underneath.
Pairing
An amplifier stable into 6 ohms is required. Its single set of terminals does not allow bi-wiring or bi-amping. The matching centre speaker is the OBERON VOKAL.
Alternatives
The OBERON 9 is the three-way floorstanding model of the series, with two 229 mm woofers and a dedicated 178 mm midrange.