Hifiverse

Standlautsprecher - DALI OBERON 5

Beschreibung, Bilder, technische Daten und Spezifikationen

DALI OBERON 5
Bildquelle - (c) DALI

The OBERON 5 is a compact two-way floorstanding loudspeaker from DALI, the Danish manufacturer, and the smaller of the two towers in the original OBERON line. DALI premiered the range at IFA 2018 in Berlin with the OBERON 1 and OBERON 3 stand-mounts, the OBERON 5 and the OBERON 7. At launch a pair was priced at GBP 700 in the UK and USD 1,099 in the US. DALI now lists the OBERON series among its discontinued products.

Key specs that matter

Two 133 mm woofers and a 29 mm soft dome tweeter are crossed over at 2.4 kHz. Frequency range is 39 Hz - 26 kHz (±3 dB). Sensitivity is 88 dB (2.83 V/1 m), nominal impedance is 6 ohms, and maximum SPL is 108 dB at 1 m. Recommended amplifier power is 30 - 150 W. Each speaker measures 830 x 162 x 283 mm (H x W x D) and weighs 11.1 kg with grille. Vinyl finishes are black ash, white, light oak and dark walnut.

Engineering and use context

Both low loss woofers use a wood fibre structured cone, a blend of fine-grain paper pulp reinforced with wood fibres that is stiff yet lightweight. It is mounted on a low loss surround and spider suspension. In the iron pole piece of each woofer magnet sits a disc of SMC, DALI's patented Soft Magnetic Composite. According to DALI, SMC reduces mechanical distortion caused by hysteresis and eddy currents, with a large reduction in third-order distortion in the motor system.

DALI developed the oversized, ultra-lightweight soft dome tweeter specifically for the OBERON series. Its large membrane generates higher sound pressure with less excursion, keeping voice coil motion small. Near the dome, the front plate has a geometry similar to the OPTICON and RUBICON tweeters.

Driver materials, driver geometry and the crossover are designed for a wide dispersion pattern and an even balance off axis. The cabinet is made of high density, CNC machined MDF board dressed in high-grade vinyl, with solid bracing across the inside. Bass ports are at the rear, and a shaped aluminium base sits under the cabinet.

Pairing

An amplifier stable into 6 ohms is required. The terminal panel has a single pair of binding posts. Spikes with M6 threads and rubber feet are supplied with each pair.

Alternatives

The OBERON 7 is the larger floorstanding model in the same DALI series.

Spezifikationen

  • Modellbezeichnung

    OBERON 5

  • Untere Grenzfrequenz +/- 3dB (Hz)

    39

  • Obere Grenzfrequenz +/- 3dB (Hz)

    26000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    6

  • Anforderungen an den Endverstärker (W)

    30 - 150

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    N/A

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten